Endless Sphere

Not sure what you mean by speedlimit... If you post back with the category and exact wording on the CA screen or Setup Utility it will make it clearer. For instance: SLim->MaxSpeed Most settings are pretty bike-specific, but we can take a look... I ment the Gain settings, porportional intergral and...

I am now running 3.1b3 i like it very much.
Thanks for the help.

What settings do you use for the speedlimit?

Wow thats sounds great i go try the 3.1b3 firmware :) The temp is only important if its near its limits, that point i swicht from 1wd to 2wd. I realy like the option you mention. Only thing i need to find now is the best setting for speed limit i cant find the right settings. Any one with 2WD MAC ha...

I get this warning when i update from V3 to V3.01https://lh3.googleusercontent.com/- https://lh3.googleusercontent.com/-VR3bFKqLEOM/V1xYty17ewI/AAAAAAAALKU/9pSQ-I696l85_WJRHCVCpcr3unz9U-NXACCo/s640/foutmelding%2Bca.jpg Everything seems to work normal. Can i just ignore this? The CA is a great produc...

Paul em3ev can make any pack you need. Just send an email with cell type and dimensions you want. I have to custom packs for my wifes bike 29e cells . they are great. He also sell the 8speed Screw on type freewheel for the mac. http://em3ev.com/store/index.php?route=product/category&path=41_56 My bi...

Teklektik already give the right answer. You need to look at the available Setup preview screens (When you paddle the bike) to see if the hardware signals are actually reaching the CA. And you have to put the bike on its wheels. With no resistance the sensor mesure no torque. This is the only way to...

Can you make a picture from the connection between ca and thun. I can not see in the movie how they make thath. You have to follow the manual from the previous post. There is decribed how to coect the thun sensor. And also important how to setup the CA If you dont have the good settings you ddont se...

@ Dogman I dont understand the first line. My english is not so good. But i will add protective material I have some space to add a layer of thick plastic bord or something. Under the black wrap there is an other layer of stuf it is like a print circuit board. I think epoxy plate. So the wires are w...

Did you set the parameters as described in the CA manual?

I use a thun sensor and it works good with the parameters set as described in the manual.

How do you wire the sensor to the CA?

I use a cube mtb for a few years now. The battery a 25Ah triangle pack from em3ev.com is in a battery bag in the frame. I was not happy with it, the battery was jumping in the bag when i ride a singel track. and I dont like the big velcro to mount the bag. Today i weld a frame for the battery witch ...

For my bike with hydraulic bakes i was looking for a witch for the ebrake. I find nice reed witch for only 5 euro. https://www.conrad.nl/nl/pic-ms-225-3-1x-no-180-vdc-130-vac-07-a-10-w-503557.html https://lh3.googleusercontent.com/-QLp9boS-vwk/Vuhtf5MRfuI/AAAAAAAALEk/bwtWtXFru4whHWhSr_MTaM-BfjAGv9h8...

before: http://www4.picturepush.com/photo/a/8742352/640/8742352.jpg after: https://lh3.googleusercontent.com/-ooGAukB-Jrs/VXX4WcDmwnI/AAAAAAAAKcQ/rfTNeHgFwHM/s800-Ic42/upload_-1.jpg https://lh3.googleusercontent.com/-sVfCQ1BxZeI/VXX4XV9M4-I/AAAAAAAAKcY/oxW4YjH29zI/s800-Ic42/upload_-1.jpg https://lh3...

Problem solved, i connect the 3 speed swich it have to be at speed 2
only then you can program it.

Now it works great on windows 10 you need to use old drivers for the usb cabele.

Thanks for the great software.

Hi i have a problem with the xpd.
I have 2 6 fett controllers from em3ev.
And one 6 fett from lyen wich is the same i think.
when try to program the controllers i get this message:

Upload failed: Invalid replay byte '38'

Do somebody know my problem?

Hi, i have an CA v3 on a 2WD bike with 2 Mac motor's. It works good, only the speedlimit is a little problem. I can not find the right settings for the gain values. Is there sombody with a bike @50V and 50A that can tell his settings so i can try if they work for me too. i try the steps from the man...

no, shorts are inevitable when there are so many cycles of handling the JST plugs to plug the charger in and out each time so the sense wires are gonna be damaged by the user and not the charger. the charger has internal controls that prevent it from overcharging so we know it is not caused by over...

I burnd my house down with a lipo. Was charging at night. I think charger dont cut off when battery was full. Charger: BC168 Balance charger Charger can do 8A but was only set @ 2A because less fannoise Battery: 6S 5000Mah zippy not old only ~ 20 charges and no un balans during use. all wires are st...

I have 2 of this chargers.

One for the 14s triangle pack and one for the wifes bike.

The switch is great. Like them and cheap to.

I have 4 batterypacks with smartbms.

No problems here.

looks good, when is the update?

My bike is 2WD with 2 small 250W motors. The bike pull 30A max @12s lipo Topspeed is 42km/h and then ~ 15A ~ 700W So i think 750W can be good for 45km/h. But you want some more for fast acceleration ;) 44.4V 20Ah is good for 45km range. 12Ah 38,4V to low for 35km At 45km/h the bike wil use ~ 20wh/km...

Hi Danny any news yet.

I was wondering if the roadlegal swich is ready. i like to use de roadlegal mode / offroad mode swich

Now i only use the mercury only as voltage / amp display and alarm.

Ok i dont have a stethoscope but i will change the caps one by one till i find if there is one damaged.

I start on the wire output side becouse i think the click come from that side of the pcb.

But it is not easy to trace the click.

I made a video where you can hear the click sound.

http://www.youtube.com/watch?v=rU3DGJ5Z ... e=youtu.be

I don't understand what part is able to make that kind of sound.

I mesure both phase wires and B+ and phase wires and B- When mesure the B+ i connect the black probe to B+ and the red to phase wire. When mesure the B- i connect the red probe to B- and the black to phase wire. Values are 0,406 ~ 0,416 Tomorrow i have a tool to check the capacity from the cap's May...