Endless Sphere

roxproductions wrote:Hey, still offering these?
I would like to get a 20s2p pack... Is this the best place to look?

go to methtek.com for details

those bikes are ridiculous! I wish I could weld like that!

Try Magura Gustav. I know Madrhino uses them because of their thin profile. I think they are the thinnest ones available.

MrKang wrote:Did the 0,1uF worked for you ?
I have the same problem ..above 52km it shows the wrong speed or goes to zero...

And if it works can you show your modification?

Turns out it stopped acting weird before I was going to do the mods!!! So I will leave it alone for now.

welcome to the sphere! i'll be brief (its getting late) so here it goes : 1- get a mountain bike with a large triangle in the middle for the pack. you can put your pack in a back rack but they tend to break easily. i know a member who is on his third already. mountain bikes seem to be pretty good fo...

Hey Farfle, I'm really interested in your rear swingarm linkage. How did you make it ? Are they all custom made pieces? Did you use a special BB? Bearings, ...etc? Having the swingarm link on the BB seems like a good and simple idea.

nice work!!! is that a dirt bike fork? if so, where did you get the headtube to make a good fit?

I use the ebikes.ca LED lights (cycle lumenator). I have 2 = 2000 lumens! It is the brightest I have seen. They are amazingly bright! and very efficient also. http://www.ebikes.ca/store/photos/Lumen.jpg

Unfortunatly I snapped my Cromotor axle yesterday after a heavy acceleration from a dead stop. I had made some room for larger phase wires... but apparently I shaved to much down :(. Now I have to figure out if it's even possible to replace. I have no idea where I can source a replacement axle and/...

great story Matt! Carrying your own means of transportation in your «pocket» is a good way to travel!

john, are there a lot of different options with bolt on rims? like diameter, width, ...etc. if so, could these rims fit on those 2 motors you have : the hubmonster HE and the mini monster?

how far are we from equalling gas bikes in terms of range and the speed of charge? when will charging a pack on a zero or other electric motorcycle will take the same time as filling up a gas tank? is this light years away or closer than we think?

Once I realized that after 5 years orbiting the 'Sphere, I not only joined the EV Grin club but I also joined the M.E.N.S. club, I had to think of a more fitting name for the folding bike. So here goes: The MENSTRUAL Cycle: M otorizd E lectric N onhub S ystem, T orque- R aised U ltraportable AL umi...

Hey Alan, nice bike! I have the exact same motor as yours on a different frame, What kind of freewheel is that? I have purchased 2 single speed freewheels and they wont fit :evil: One will not screw on all the way (so that its flush), and the other one has the right thickness but the diameter is too...

Cheap labor is not good, good labor is not cheap. Keep it up Ice! You make quality stuff! I'm really happy with the harnesses you made for me. If you want quality, do yourself a favor and get it from Ice!

what a great video! Thanks for sharing!

DP version, will try shielding the hall wires. Thanks Amberwolf!!!

I noticed that my CA is giving me weird speed data above 50kph??? Its giving all kinds of readings and changes really fast. My pole count is right, the shunt value is right. Any ideas???

do you mean the add-on current throttle mod on the CA??? That gives you a throttle that's proportional to power, rather than torque, so is better in some respects than a typical ebike controller that has a throttle that's proportional to speed, but isn't quite as nice a feel (IMHO) as a throttle th...

DesignerDan wrote:I got this one:
http://kellycontroller.com/kbs72121l50a ... -1175.html
It seems to be perfect for hubzilla. 4000 continuous watts and 10,000 burst watts.

Dont mean to be OT, but can you fit a CA on those?

fixed! Well... turns out there is nothing wrong with it! At 100 volts, the throttle is so sensitive that even the slightest variation will cause it to jerk. What we need are better throttles for running 100+ volts. Maybe an Algorithm could be programmed in the firmware to make the throttle response...

fixed! Well... turns out there is nothing wrong with it! At 100 volts, the throttle is so sensitive that even the slightest variation will cause it to jerk. What we need are better throttles for running 100+ volts. Maybe an Algorithm could be programmed in the firmware to make the throttle response ...

I have the «first batch motor», what is the number of poles value I should put in the CA? Thanks!

I noticed this morning my controller started stuttering a bit near the end of my commute. It happened when I was accelerating at maybe half or 3/4 throttle. Its the first time it happens and i did not change any settings on the CA or the controller before this. Is there any protection inside the con...

if you're going to run this bike with that much power, I highly suggest some moto rims and tires. The handling is so much better! Talk to John at http://holmeshobbies.com/ He's awesome!