MY E-Scooter could use some NOISE !!

General Discussion about large electric scooters and motorcycles and other things with no pedals.

Re: MY E-Scooter could use some NOISE !!

Postby amberwolf » Sat May 08, 2010 4:45 am

House Fire Updates Thread


Got a question that isn't personal or private? Post it in the forums, don't PM it. ;)

Wiki your techy info so it doesn't get old, lost and icky:
http://endless-sphere.com/w


Full-Suspension Semi Recumbent Cargo Bike - NuVinci MidDrive
Semi-Recumbent Recycled-Parts Cargo eBike: "CrazyBike2"
DayGlo Avenger, MkII
User avatar
amberwolf
100 GW
100 GW
 
Posts: 13821
Joined: Mon Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group

Re: MY E-Scooter could use some NOISE !!

Postby TylerDurden » Sat May 08, 2010 7:38 am

amberwolf wrote:http://www.allelectronics.com/make-a-store/item/ST-1/SPACE-SOUNDS-PC-BOARD/1.html
All electronics wrote:you may get one or more space sounds. At the very least, you get a 2" diameter 8 Ohm speaker, S.P.D.T. slide switch, two leds and a 9-volt battery snap.
A customer from Wauconda, Illinois wrote:0 for3 but still trying
Have purchased 3 so for and all only work on one mode, luckily I use the parts for other projects, can't beat the price.
:lol:
Have a Nice Day,

TD

Image
___________________________________________________________

FYI: Adding pictures?

Bored?... take a crack at the unanswered posts

Please post your Watts-at-speed in the survey.



Image
User avatar
TylerDurden
100 GW
100 GW
 
Posts: 8541
Joined: Thu Jan 04, 2007 5:50 pm
Location: Wear the fox hat.

Re: MY E-Scooter could use some NOISE !!

Postby John in CR » Sat May 08, 2010 9:22 am

1+ Get a bell for people and bikes. Add a horn for cars. Other sounds, while seemingly cool, will only confuse people and result in someone turning right into you. Bells aren't offensive and are mandatory on bikes in some locales, so it seems like a good standard that we should all get used to and promote.
John in CR
100 GW
100 GW
 
Posts: 10489
Joined: Tue May 20, 2008 12:58 am
Location: Paradise

Re: MY E-Scooter could use some NOISE !!

Postby amberwolf » Sun May 09, 2010 2:31 am

@TylerDurden: I didn't read the user comments on that one. :( Well, it's likely that the chips and stuff all (or mostly) work, just that there is a bug in the PCB or wiring design. The chips could probably still be used to create the sound effects, if the bug could be worked out. :)
House Fire Updates Thread


Got a question that isn't personal or private? Post it in the forums, don't PM it. ;)

Wiki your techy info so it doesn't get old, lost and icky:
http://endless-sphere.com/w


Full-Suspension Semi Recumbent Cargo Bike - NuVinci MidDrive
Semi-Recumbent Recycled-Parts Cargo eBike: "CrazyBike2"
DayGlo Avenger, MkII
User avatar
amberwolf
100 GW
100 GW
 
Posts: 13821
Joined: Mon Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group


Re: MY E-Scooter could use some NOISE !!

Postby liveforphysics » Sun May 09, 2010 5:19 am

Get a big brushless outrunner. Then it sounds kinda like a jet-engine crossed with a vacuum cleaner as you ride, but it's as nice sound overall. :)
For ebike parts, don't be a douche, buy from http://www.ebikes.ca or http://www.MethTek.com

Justin saved the forum at great personal expense! The man is a legend and a hero!
User avatar
liveforphysics
100 GW
100 GW
 
Posts: 11008
Joined: Wed Oct 29, 2008 1:48 am
Location: Santa Cruz, CA, USA

Re: MY E-Scooter could use some NOISE !!

Postby spinningmagnets » Sun May 09, 2010 10:43 am

I think it would be great if the electronics guys here figured out the best way to make a noise-generating device. Especially if it allows the user to download a selection of sounds you want from off of the web.

If some one works on this, please post the schematics and parts needed to work with 36V, 48V and 72V...
User avatar
spinningmagnets
10 GW
10 GW
 
Posts: 4799
Joined: Fri Dec 21, 2007 10:27 pm
Location: Ft Riley, NE Kansas

Re: MY E-Scooter could use some NOISE !!

Postby Sheriff Jon » Sun May 09, 2010 11:42 am

It would be kind of cool if all electric motors made the Jetsons sound, but people seem to hear me as I approach on my Electric scooter. The drivetrain or chain noise is just enough for pedestrians (on the sidewalk) to hear me, as I see them cock their head to the left as if to say...What is that? I also have an Incredibell that I ding ding when comming up on to the back of cyclists.
"HOW we ride today, may determine IF we can ride tomorrow"
User avatar
Sheriff Jon
1 kW
1 kW
 
Posts: 305
Joined: Wed Sep 03, 2008 11:30 am
Location: Huntington Beach, Ca

Re: MY E-Scooter could use some NOISE !!

Postby amberwolf » Sun May 09, 2010 6:25 pm

@spinningmagnets: There are a number of types of the main part of this already around like the one posted above that is even multi-triggerable. :)

http://LadyAda.net has some projects that could be used for it too.

All you need to power any of them is a small DC-DC converter, and a lot of celphone chargers already laying around in your home or local thrift stores could do this.

Then a little amplified speaker to project the sound.

So all that needs to be done is packaging them up together in a little box with wires on the end to plug into your pack.
House Fire Updates Thread


Got a question that isn't personal or private? Post it in the forums, don't PM it. ;)

Wiki your techy info so it doesn't get old, lost and icky:
http://endless-sphere.com/w


Full-Suspension Semi Recumbent Cargo Bike - NuVinci MidDrive
Semi-Recumbent Recycled-Parts Cargo eBike: "CrazyBike2"
DayGlo Avenger, MkII
User avatar
amberwolf
100 GW
100 GW
 
Posts: 13821
Joined: Mon Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group

Re: MY E-Scooter could use some NOISE !!

Postby MrKang » Mon May 10, 2010 6:57 am

Miles wrote:http://endless-sphere.com/forums/viewtopic.php?f=7&t=9845&p=152074

http://www.modelsolutions.ca/catalog_sound_systems.htm

http://www.beier-electronic.de/modellba ... -RC_GB.pdf


This is It ! only the price scares the hell out of me... :evil:

But this gadget can do it all... gonna try to make a mix of the atari pcb tone generator mixed together with a jetson space sound.
MrKang E-Scooter : 24V 750W Bosch Motor modified with YK-43 48V 1kW on 12S6P Lipo - top speed 44kmph
Xinling XTD800A : LYEN 4110 72V (modified for safe 100.8V with extra cooling) - 24S4P/100.8V 25Ah Turnigy + CA with Datalogger + SOUNDSYSTEM + USB power outlet + 78km top speed(120%)
MrKang Retro II : in progress.. ** 12FET MKII LYEN + 28S 20AH LifePO4 cells **
Project link [/color]: http://endless-sphere.com/forums/viewtopic.php?f=10&t=13442
User avatar
MrKang
1 kW
1 kW
 
Posts: 364
Joined: Fri May 01, 2009 12:52 am
Location: The Netherlands

Re: MY E-Scooter could use some NOISE !!

Postby fechter » Mon May 10, 2010 9:06 am

MrKang wrote:
This is It ! only the price scares the hell out of me... :evil:


I agree, that is IT pretty much, but too spendy for my budget.
It seems like you could do somthing with a Basic Stamp or Audrino board, but I don't know about software.

For the price of that thing, you could get a Korg Kaoscillator: http://www.bhphotovideo.com/c/product/543486-REG/Korg_KO1_KO1_KAOSSILATOR_Dynamic.html

I'm not sure how you would interface it, but it makes some really cool sounds.

Here's one that's closer, a digital voice recorder using an Atmel AT90S8535. They have the code for a voice recorder, so it would take some software hacking to make it into a sample loop player with variable pitch.
http://wiredworld.tripod.com/tronics/dvr.html

Another Atmel voice recorder: http://www.atmel.com/dyn/resources/prod_documents/doc1456.pdf

This one looks interesting too, Just the chip with software already loaded, but I didn't see the price:
http://www.eletech.com/Products/QuikVoice_Chips/VP1000A/vp1000a.htm

While we're at it, DigiKey has a digital voice recorder chip for $5.50.
That's more in my price range. The pitch of the sample can be changed by varying an external oscillator. http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=ISD1610BSY-ND
Here's the datasheet: http://media.digikey.com/pdf/Data%20Sheets/Nuvoton%20PDFs/ISD1600B%20Series.pdf. Just record the sample of your choice and play it back in a loop.
"One test is worth a thousand opinions"
User avatar
fechter
100 GW
100 GW
 
Posts: 9390
Joined: Sun Dec 31, 2006 3:23 pm
Location: California Bay Area, USA

Re: MY E-Scooter could use some NOISE !!

Postby Miles » Mon May 10, 2010 9:29 am

User avatar
Miles
100 GW
100 GW
 
Posts: 9289
Joined: Fri Mar 16, 2007 4:15 pm
Location: London UK

Re: MY E-Scooter could use some NOISE !!

Postby Thud » Mon May 10, 2010 11:07 am

I am going to use the old "playing card & a clothes pin" trick at the race in ohio. :lol:

Not very hi tech I know but super cool (at least when I was 7 yo)
get some......

All information & advice provided by Thud are "Open Source" & free for personal use & distribution under the following agreement linked below.
http://creativecommons.org/licenses/by-nc-nd/3.0/
User avatar
Thud
10 MW
10 MW
 
Posts: 2386
Joined: Thu Aug 20, 2009 6:20 am
Location: West Michigan,USA

Re: MY E-Scooter could use some NOISE !!

Postby jsplifer » Mon May 10, 2010 12:42 pm

Hmm, I'm with Liveforphysics on this one. I love the turbine whine, so maybe some kind of whistle on the spokes? if your motor doesn't have that TTGXP sound. You know that sound, the highvolatage high rpm sound. Like recumpance's high pitch ESC's... love that.

or a tire pump fillable air horn.

http://www.youtube.com/watch?v=YYkBHGurj-I
jsplifer
1 W
1 W
 
Posts: 55
Joined: Thu May 21, 2009 9:16 am

Re: MY E-Scooter could use some NOISE !!

Postby amberwolf » Mon May 10, 2010 7:30 pm

fechter wrote:It seems like you could do somthing with a Basic Stamp or Audrino board, but I don't know about software.

Check LadyAda's site and forums; there are a number of audio projects that could be adapted. ;) Likely some folks there that could help doing it, too.
House Fire Updates Thread


Got a question that isn't personal or private? Post it in the forums, don't PM it. ;)

Wiki your techy info so it doesn't get old, lost and icky:
http://endless-sphere.com/w


Full-Suspension Semi Recumbent Cargo Bike - NuVinci MidDrive
Semi-Recumbent Recycled-Parts Cargo eBike: "CrazyBike2"
DayGlo Avenger, MkII
User avatar
amberwolf
100 GW
100 GW
 
Posts: 13821
Joined: Mon Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group

Re: MY E-Scooter could use some NOISE !!

Postby MrKang » Tue May 11, 2010 2:46 am

liveforphysics wrote:Get a big brushless outrunner. Then it sounds kinda like a jet-engine crossed with a vacuum cleaner as you ride, but it's as nice sound overall. :)


You have given me another inspiration !!

What about... A EDF mounted on a tube (extra noise through the windtunnel) and the output of the tube is connected to your controller !! (which also provides super coolling when hitting full throttle !)
FLASHSALE ITEMS : 11.34 + 7.05

Image
Image

don't know which cheapo controller i can add with this motor.

Has anybody a EDF soundclip? i'm currious what the sound would be like.
But if it's what i think it is, than it's a go! then i hit 2 flies in one smack (dutch saying) :mrgreen:
MrKang E-Scooter : 24V 750W Bosch Motor modified with YK-43 48V 1kW on 12S6P Lipo - top speed 44kmph
Xinling XTD800A : LYEN 4110 72V (modified for safe 100.8V with extra cooling) - 24S4P/100.8V 25Ah Turnigy + CA with Datalogger + SOUNDSYSTEM + USB power outlet + 78km top speed(120%)
MrKang Retro II : in progress.. ** 12FET MKII LYEN + 28S 20AH LifePO4 cells **
Project link [/color]: http://endless-sphere.com/forums/viewtopic.php?f=10&t=13442
User avatar
MrKang
1 kW
1 kW
 
Posts: 364
Joined: Fri May 01, 2009 12:52 am
Location: The Netherlands

Re: MY E-Scooter could use some NOISE !!

Postby amberwolf » Tue May 11, 2010 3:21 am

googling "EDF soundclip" finds this:
http://www.rcgroups.com/forums/showthread.php?t=1119868
but the video with the sound has been deleted from youtube for some reason, by the user.

But a minute's further searching finds this:
and 4 minutes in or so is it flying around. Around 8:50 or so is a really good pass.
House Fire Updates Thread


Got a question that isn't personal or private? Post it in the forums, don't PM it. ;)

Wiki your techy info so it doesn't get old, lost and icky:
http://endless-sphere.com/w


Full-Suspension Semi Recumbent Cargo Bike - NuVinci MidDrive
Semi-Recumbent Recycled-Parts Cargo eBike: "CrazyBike2"
DayGlo Avenger, MkII
User avatar
amberwolf
100 GW
100 GW
 
Posts: 13821
Joined: Mon Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group

Re: MY E-Scooter could use some NOISE !!

Postby fechter » Tue May 11, 2010 9:02 am

I don't know if you've ever heard my Vego running (there's a Utube video of it somewhere), but it sounds almost like a turbine. I think you'd get a very similar sound by tapping a speaker into the phase wires on a brushless motor.
"One test is worth a thousand opinions"
User avatar
fechter
100 GW
100 GW
 
Posts: 9390
Joined: Sun Dec 31, 2006 3:23 pm
Location: California Bay Area, USA

Re: MY E-Scooter could use some NOISE !!

Postby Hyena » Thu May 20, 2010 4:30 am

As I mentioned in a thread the other day, I'd like my ebike to sound like a ghost busters proton pack when turned on and off 8)

http://www.youtube.com/watch?v=PUZMkDRn1ys
www.HyenaElectricBikes.com
Aussie high powered and custom e-bike kits
My build and HD video thread__. My youtube channel
My bike is writing cheques my body can't cash...
User avatar
Hyena
10 GW
10 GW
 
Posts: 4219
Joined: Wed Aug 13, 2008 9:10 am
Location: Sydney, Australia

Re: MY E-Scooter could use some NOISE !!

Postby MrKang » Thu May 20, 2010 7:38 am

Hyena wrote:As I mentioned in a thread the other day, I'd like my ebike to sound like a ghost busters proton pack when turned on and off 8)

http://www.youtube.com/watch?v=PUZMkDRn1ys


His soundboard chips are much cooler and can be looped or re-triggered. only i don't see on his website if it is possible to program it yourself .
It looks like you have to give your wishes to him and he wil program it for you. It wold be ncer when you can do that by yourself.
MrKang E-Scooter : 24V 750W Bosch Motor modified with YK-43 48V 1kW on 12S6P Lipo - top speed 44kmph
Xinling XTD800A : LYEN 4110 72V (modified for safe 100.8V with extra cooling) - 24S4P/100.8V 25Ah Turnigy + CA with Datalogger + SOUNDSYSTEM + USB power outlet + 78km top speed(120%)
MrKang Retro II : in progress.. ** 12FET MKII LYEN + 28S 20AH LifePO4 cells **
Project link [/color]: http://endless-sphere.com/forums/viewtopic.php?f=10&t=13442
User avatar
MrKang
1 kW
1 kW
 
Posts: 364
Joined: Fri May 01, 2009 12:52 am
Location: The Netherlands

Re: MY E-Scooter could use some NOISE !!

Postby spinningmagnets » Wed Apr 18, 2012 6:22 pm

Dominos Pizza delivery E-scooter with noise generator (Holland?)

http://www.youtube.com/watch?v=n17B_uFF4cA&feature=youtu.be
User avatar
spinningmagnets
10 GW
10 GW
 
Posts: 4799
Joined: Fri Dec 21, 2007 10:27 pm
Location: Ft Riley, NE Kansas

Re: MY E-Scooter could use some NOISE !!

Postby amberwolf » Wed Apr 18, 2012 7:56 pm

I would deliberately run myself under a car if I had to ride that more than about 30 seconds. :lol:
House Fire Updates Thread


Got a question that isn't personal or private? Post it in the forums, don't PM it. ;)

Wiki your techy info so it doesn't get old, lost and icky:
http://endless-sphere.com/w


Full-Suspension Semi Recumbent Cargo Bike - NuVinci MidDrive
Semi-Recumbent Recycled-Parts Cargo eBike: "CrazyBike2"
DayGlo Avenger, MkII
User avatar
amberwolf
100 GW
100 GW
 
Posts: 13821
Joined: Mon Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group

Re: MY E-Scooter could use some NOISE !!

Postby Spicerack » Wed Apr 18, 2012 8:11 pm

I used to have a rubber bulb klaxon on my old bike- that got peoples' attention! Like this but cheaper! http://www.ebay.com.au/itm/Dragster-Lowrider-Bicycle-Bike-Bugle-Horn-/251042081839?pt=AU_Sport_Cycling_Bikes&hash=item3a73462c2f

But now we're in the electronic age, there's all sorts of weird and wonderful stuff out there- http://www.ebay.com.au/itm/6-Sounds-Ultra-loud-Bicycle-Bike-Electronic-Bell-Horn-Supervoice-Speaker-Siren-/290657639127?pt=LH_DefaultDomain_15&hash=item43ac8b9ad7. This one sounds good- even the button is "very comfortable and sensitive". Nice to know that the button is sensitive- you wouldn't want one that doesn't take into account your feelings.

Then there's this "High Qulity" Police siren... http://www.ebay.com.au/itm/High-Qulity-100-Brand-New-6LED-4Sounds-Bicycle-Horn-Bell-Police-Car-Ligh-/280864830336?pt=AU_Sport_Cycling_Accessories&hash=item4164d93380

:lol:
Norco Shore2
Was Cellman MAC rear oil cooled now 8x8 9C vented and temp probed
12 FET controller
62V 18650 home made battery pack
50 km/h
http://endless-sphere.com/forums/viewtopic.php?f=6&t=32769
Repair thread http://endless-sphere.com/forums/viewtopic.php?f=2&t=34806
Oil cooling the hubbie http://endless-sphere.com/forums/viewtopic.php?f=2&t=37972
Spicerack
10 kW
10 kW
 
Posts: 534
Joined: Fri Jan 28, 2011 2:09 am
Location: Perth, Western Oz

Re: MY E-Scooter could use some NOISE !!

Postby StudEbiker » Wed Apr 18, 2012 8:39 pm

TidalForce S-750-(build #2) w/9C rear w/EV Components Headway 36v 10ah LiFePo4 pack: http://endless-sphere.com/forums/viewtopic.php?f=6&t=15443&hilit=+headway+rack+pack

Bike-E (Build #3, mostly done)- 400W Kollmorgen mid-drive: http://endless-sphere.com/forums/viewtopic.php?f=28&t=25980#p375646
My Bike E Facebook group: http://www.facebook.com/groups/165756106813440/

"Facts do not cease to exist because they are ignored" - Aldous Huxley
User avatar
StudEbiker
10 MW
10 MW
 
Posts: 2274
Joined: Mon Apr 13, 2009 2:15 pm
Location: Ashland, OR, USA

Re: MY E-Scooter could use some NOISE !!

Postby Spicerack » Thu Apr 19, 2012 2:02 am

StudEbiker wrote:


Now that really is a lol moment....

Hold on, aren't we supposed to be stealth? :shock:
Norco Shore2
Was Cellman MAC rear oil cooled now 8x8 9C vented and temp probed
12 FET controller
62V 18650 home made battery pack
50 km/h
http://endless-sphere.com/forums/viewtopic.php?f=6&t=32769
Repair thread http://endless-sphere.com/forums/viewtopic.php?f=2&t=34806
Oil cooling the hubbie http://endless-sphere.com/forums/viewtopic.php?f=2&t=37972
Spicerack
10 kW
10 kW
 
Posts: 534
Joined: Fri Jan 28, 2011 2:09 am
Location: Perth, Western Oz

Next

Return to E-Scooter and Motorcycle General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests