spkpn
1 W
- Joined
- Oct 4, 2011
- Messages
- 64
Dear all,
I bought a used sevcon gen 4 controller. The seller (a member of this forum) assured me that it was possible to program/set up the controller with nothing else but a usb-can converter (no handheld etc). In fact he told me
after I specificly asked for SOFTWARE OR HARDWARE necessary by mail!
However, after reading this post:
http://endless-sphere.com/forums/viewtopic.php?f=10&t=35552#p518745
I am not sure anymore whether I was misled by the seller of the device! Please help me in finding out.
I bought a used sevcon gen 4 controller. The seller (a member of this forum) assured me that it was possible to program/set up the controller with nothing else but a usb-can converter (no handheld etc). In fact he told me
programming is possible without the handheld, you just need a pc and an usb-can converter
after I specificly asked for SOFTWARE OR HARDWARE necessary by mail!
However, after reading this post:
http://endless-sphere.com/forums/viewtopic.php?f=10&t=35552#p518745
I am not sure anymore whether I was misled by the seller of the device! Please help me in finding out.