space4dreamz
1 W
Does anyone knows where can I find a user manual for that charger?
I've lost mine and I can't find it anywhere on the net.
Thanks guys
I've lost mine and I can't find it anywhere on the net.
Thanks guys
Spacey said:Took me 2 seconds
Google is your friend, not sure they deliver to the Milky Way though.
http://dx.com/p/bc168-1-6s-8000ma-200w-high-precision-lcd-intellective-balance-charger-124483
pendragon8000 said:What is your low voltage alarm set at?
I have run mine at 11 v but the charger acts weird, uneven power to the channels.
If you get a decent PSU you won't regret it.
Mean well 350watt or a copy/ clone
space4dreamz said:Does somebody understands what does the values 05-30 mean?
I can't spot the difference when I'm changing that value.
Under charge trickle frequency set up mode, push _ or _ to adjust the trickle speed. After that and then push MODE to enter change time set up mode. (Set scope: 5 ~ 30, Pre-set 30)
frock the manul you need a good PSU. then life will be goodspace4dreamz said:pendragon8000 said:What is your low voltage alarm set at?
I have run mine at 11 v but the charger acts weird, uneven power to the channels.
If you get a decent PSU you won't regret it.
Mean well 350watt or a copy/ clone
I'm using a simple 12V/4A PSU till i'll get a decent one. The current one is allowing 1.3A per cell which is ok cause i'm using it only for balancing after bulk charging (The HVC stops the bulk charge when one cell reaches 4.2V).
The low voltage alarm is set to 11.9 (The PSU out is 12-12.5V). Since I lowered The current to 1.3A - no problems.
BTW, did your son really found Excalibur?
space4dreamz said:Does somebody understands what does the values 05-30 mean?
I can't spot the difference when I'm changing that value.
Thanks guys.