unclejemima
100 W
Ok. I've been doing lots of reading...and I'm not 100% sure and wanted to double check one last time before going into using lithium power tool batteries for non-power tool applications.
Can I simply connect to the positive and negative connections to power my device and call it a day?
There always seem to be 4 plugs on a power tool battery. On far left and right are Positive and Negative. In the middle are two connections that one usually has an OHM symbol and the other one I think has C.
My assumption is the two middle ones are using for the charger to balance the cells when charging only...and do not affect use when discharging with a device.
So am I safe to plug in to both + and - and call it a day?
Can I simply connect to the positive and negative connections to power my device and call it a day?
There always seem to be 4 plugs on a power tool battery. On far left and right are Positive and Negative. In the middle are two connections that one usually has an OHM symbol and the other one I think has C.
My assumption is the two middle ones are using for the charger to balance the cells when charging only...and do not affect use when discharging with a device.
So am I safe to plug in to both + and - and call it a day?