72v controller is blinking red.And no power to my motor plz

Artman300

1 µW
Joined
Jul 17, 2011
Messages
2
72v controller is blinking red.And no power to my motor plz help I am using a super bmc 1500w motor. artmanon28s@yahoo.com 216 571 5442

(moderator edit: Moved from unrelated thread to it's own, also warning user not to PM-spam other users multiple times with the same message. If you need help, find a thread that describes the same problem and try those solutions first, if any are there, then post in that thread what you *have* tried and what happened or didnt' happen. If no existing thread matches your problem and hardware, start your own thread about it with as much detail as you can give.

DON'T PM MEMBERS MULTIPLE TIMES WITHIN TWO MINUTES ABOUT YOUR PROBLEM. :evil: )
 
Not a 72 volt controller? Most of the ones with LED lights inside, when they blink red it could mean any number of things but for me it's always indicated Over Voltage Condition which would mean it's not a 72v controller.... perhaps if you could post some pics, someone may know the controller and be able to offer assistance or advice :)

Regards,
Mike
 
Back
Top