I have 2 Gattos that I picked up for cheap, with a new set of batteries. The bikes have 600 and 1400 kms. The bike didn't run so they bought new batteries and they got another for parts. I have wired houses and cars, but I don't know anything about circuit boards or testing (yet). I plan on checking all the wires and putting one bike together and see what happens. I have noticed that the better bike has a wire with a small black plug and the other bike has maybe a small diode plug in, about 1/4'' diameter, coming out of the controller. Any idea what that is?
It there different throttles that can be bought?
I have read about shunt mods, not sure if I will do it. I plan on adding another 20A battery is parallel, I'd like some more torque and range. It would be great if it was a little faster, but these things aren't something I want to do 70 on. The wheel says it's 700W. I had a similar scooter in China and loved it. It had a 3 power level switch.
>>>> Any other suggestions for mods.
EDIT: I call anything on 2 wheels a bike, all my motorcycles have been called bikes. I did not write ebike.
It there different throttles that can be bought?
I have read about shunt mods, not sure if I will do it. I plan on adding another 20A battery is parallel, I'd like some more torque and range. It would be great if it was a little faster, but these things aren't something I want to do 70 on. The wheel says it's 700W. I had a similar scooter in China and loved it. It had a 3 power level switch.
>>>> Any other suggestions for mods.
EDIT: I call anything on 2 wheels a bike, all my motorcycles have been called bikes. I did not write ebike.