Meanwell question......

Get all your technical information about electric bikes here.
Post Reply
User avatar
Tommy L
100 kW
100 kW
Posts: 1111
Joined: Dec 23, 2010 4:33 pm
Location: Saint Augustine, Florida USA

Meanwell question......

Post by Tommy L » Nov 26, 2017 7:12 pm

When I run 2 meanwells in series......
Sometimes one will not volt up.....
So I unplug - wait - plug back in...... and
It’s good.

Is there a startup technique I need to do while
these are in series?
http://www.rawvelocity.com

- 4th Hoolagan FS Mtn 9C-2810 with 128v nom 9.2ah A123 40S40P(1.2Kw) - Lyen 18Fet 4115 - 77.8kph :)
https://endless-sphere.com/forums/viewto ... =4&t=39480

- 3rd Catrike 700 Bionx PL350 Velo build
http://www.youtube.com/watch?v=rYdnkaAhVtI

- 2nd 150lbs Pusher Trailer
http://www.youtube.com/watch?v=Q1qTc4sjORY

- 1st Sears NS mtn bike - Rigid 10a drill 800rpm - 2 12v AGM - 1000 watt inverter - 600w dimmer for throttle, wicked torque!

48.2mph/77.8kph Club

Post Reply