Kelly Controller RS232 to TTL cable

johnnyz

1 kW
Joined
May 10, 2012
Messages
379
Location
london,ontario
Hi there

Received my Kelly KLS 8430 controller but only a RS323 to USB cable and nothing to go between this and the TTL 4 pin cable out of the controller....Does anyone know if there is a generic cable that will work or does anyone have one I can buy so I can get this up and running?rs232.jpgttl.jpg
 
wow...I am suprised..Damon sent me the missing cable but sent it EMS which is ridiculous considering it was their mistake in the first place and could take 3 weeks...I cant believe no one knows how to hook this ttl 4 pin connector to a usb ...


John
 
johnnyz said:
I cant believe no one knows how to hook this ttl 4 pin connector to a usb ...
First stop is always the manufacturer - not a public forum.
Same amount of typing to get authoritative information.

That said - I have never programmed a Kelly, but my guess is that you need this adapter to mate that standard cable to the controller-specific JST-4F connector you pictured:

http://kellycontroller.com/sm-4a-to-db9rs232-converter-p-1403.html


4pin.jpg
 
teklektik said:
johnnyz said:
I cant believe no one knows how to hook this ttl 4 pin connector to a usb ...
First stop is always the manufacturer - not a public forum.
Same amount of typing to get authoritative information.

That said - I have never programmed a Kelly, but my guess is that you need this adapter to mate that standard cable to the controller-specific JST-4F connector you pictured:

http://kellycontroller.com/sm-4a-to-db9rs232-converter-p-1403.html


4pin.jpg

Thanks for the response..obviously Kelly would be the go-too place..just trying to see if I can buy on Amazon for example and get one here quicker.
 
Back
Top