SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race Track

Use this forum to post up events, rally, conventions, get-together, etc. for anything related to the e-vehicle world (e-bike, car, motorcycle, etc). Guest may post replies to topics without the need to register. All topics here expire after 1 year of inactivity.

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby liveforphysics » Tue Jan 17, 2012 10:09 pm

GCinDC wrote:
liveforphysics wrote:I'm building an all new frame though... Full suspension this time, setup with 1" of sag front and rear, and 1" of travel after the sag, so 2" total travel front and rear. Needle bearing pivots and linkage. All batteries and motor tucked into the front triangle. And for road racing, I only need about 1/5th the power of my current bike, so a smaller drivetrain as well.

very interesting... link to thread pls.. 8)

April, huh? I do need a couple days away... :twisted:



It exists only in my head so far. I will do a build thread when im starting physical work.
For ebike parts, don't be a douche, buy from http://www.ebikes.ca or http://www.MethTek.com

Justin saved the forum at great personal expense! The man is a legend and a hero!
User avatar
liveforphysics
100 GW
100 GW
 
Posts: 10963
Joined: Wed Oct 29, 2008 1:48 am
Location: Santa Cruz, CA, USA

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby nicobie » Wed Jan 18, 2012 2:00 pm

I really don't understand the thinking about running small moped tires vs hookworms.

Using the heavier moped tires doesn't give anybody an edge over the hookworms. They are just safer, and who doesn't want that?
Image

May your tote always stay tight and your edge eversharp :wink:

my eTownie build thread: viewtopic.php?f=6&t=23701
User avatar
nicobie
1 MW
1 MW
 
Posts: 1815
Joined: Thu Aug 07, 2008 1:48 pm
Location: Central Coast CA,USA

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby MotorBicycleRacing » Wed Jan 18, 2012 2:45 pm

Thud wrote:Neil,
PIRELLI ML75'S 2.5-16" (on 20" bicycle rims with bicycle hubs & bicycle spokes)

Leagle for compitition or not.....just say yes or no please. (that "If" you posted raised my eyebrows)

My only real gripe on the bicycle stuff is, it's way overpriced....the Ml75's cost me a 1/3 less than hookworms.

If I am going to blow $800.00 (& a weeks vacation) on a trip out west, The fewer suprises the better. :P

Yes, the Pirelli's are approved to race with as you stated.
The question on the other thread where I said "IF" was about a new 17" moped tire.

The only ebike to run the PIRELLI ML75'S 2.5-16" at the last Oct 22nd Grange race was Jay64

The only gas bike guy that I know of with a new build using PIRELLI ML75'S 2.5-16" is baird with a tiny kids bike.
Last edited by MotorBicycleRacing on Sat Jan 21, 2012 7:04 pm, edited 1 time in total.
SoCal Motor Bicycle Racing Sat June 2nd 2012 at Grange Motor Circuit.
http://www.facebook.com/MotorizedBicycleRacing

Register for the race at MotorBicycleRacing@gmail.com
User avatar
MotorBicycleRacing
100 W
100 W
 
Posts: 127
Joined: Mon Aug 22, 2011 1:08 am

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby Stevil_Knevil » Wed Jan 18, 2012 11:14 pm

Not sure if this is the place to cast my vote, but YES for allowing >2.5" moped tires at MBR events!!
User avatar
Stevil_Knevil
10 kW
10 kW
 
Posts: 769
Joined: Tue Jan 09, 2007 8:32 pm
Location: Up where the air is fresh and clean

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby MotorBicycleRacing » Sat Jan 21, 2012 6:58 pm

Stevil_Knevil wrote:Not sure if this is the place to cast my vote, but YES for allowing >2.5" moped tires at MBR events!!

Yes, 2.5" Moped tires are allowed at SoCal Motor Bicycle Races.
SoCal Motor Bicycle Racing Sat June 2nd 2012 at Grange Motor Circuit.
http://www.facebook.com/MotorizedBicycleRacing

Register for the race at MotorBicycleRacing@gmail.com
User avatar
MotorBicycleRacing
100 W
100 W
 
Posts: 127
Joined: Mon Aug 22, 2011 1:08 am

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby Stevil_Knevil » Sat Jan 21, 2012 7:16 pm

MotorBicycleRacing wrote:
Stevil_Knevil wrote:Not sure if this is the place to cast my vote, but YES for allowing >2.5" moped tires at MBR events!!

Yes, 2.5" Moped tires are allowed at SoCal Motor Bicycle Races.


Thank you, Neil :)
User avatar
Stevil_Knevil
10 kW
10 kW
 
Posts: 769
Joined: Tue Jan 09, 2007 8:32 pm
Location: Up where the air is fresh and clean

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby MotorBicycleRacing » Fri Jan 27, 2012 2:16 am

nicobie wrote:I really don't understand the thinking about running small moped tires vs hookworms.

Using the heavier moped tires doesn't give anybody an edge over the hookworms. They are just safer, and who doesn't want that?

The Pirelli's ML75's have a big advantage over the Maxxis hookworms in performance.
just ask Thud or Liveforphysics.

Also 99% of the gas bike guys use 26" wheels and will not convert to small diameter Moped size tires.
Maxxis hookworms are not unsafe. Any bike that is tearing them up is outside
of the 11 hp limit set for gas bikes at the Socal races.
That would put them in the Unlimited class where pretty much anything is allowed including motorcycle tires.
SoCal Motor Bicycle Racing Sat June 2nd 2012 at Grange Motor Circuit.
http://www.facebook.com/MotorizedBicycleRacing

Register for the race at MotorBicycleRacing@gmail.com
User avatar
MotorBicycleRacing
100 W
100 W
 
Posts: 127
Joined: Mon Aug 22, 2011 1:08 am

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby etard » Sat Jan 28, 2012 3:17 pm

MotorBicycleRacing wrote:
nicobie wrote:I really don't understand the thinking about running small moped tires vs hookworms.

Using the heavier moped tires doesn't give anybody an edge over the hookworms. They are just safer, and who doesn't want that?

The Pirelli's ML75's have a big advantage over the Maxxis hookworms in performance.
just ask Thud or Liveforphysics.

Also 99% of the gas bike guys use 26" wheels and will not convert to small diameter Moped size tires.
Maxxis hookworms are not unsafe. Any bike that is tearing them up is outside
of the 11 hp limit set for gas bikes at the Socal races.
That would put them in the Unlimited class where pretty much anything is allowed including motorcycle tires.



I totally agree with this statement
Four wheels moves the body, Two wheels moves the soul
Thanks to Justin @ http://www.ebike.ca He brings the soul to ES
User avatar
etard
10 MW
10 MW
 
Posts: 2029
Joined: Sun Aug 03, 2008 3:28 pm
Location: Redlands, CA

Re: SoCal Motor Bicycle Race Sat Oct 22nd 2011 Grange Race T

Postby nicobie » Thu Feb 02, 2012 7:21 pm

etard wrote:
MotorBicycleRacing wrote:
nicobie wrote:I really don't understand the thinking about running small moped tires vs hookworms.

Using the heavier moped tires doesn't give anybody an edge over the hookworms. They are just safer, and who doesn't want that?

The Pirelli's ML75's have a big advantage over the Maxxis hookworms in performance.
just ask Thud or Liveforphysics.

Also 99% of the gas bike guys use 26" wheels and will not convert to small diameter Moped size tires.
Maxxis hookworms are not unsafe. Any bike that is tearing them up is outside
of the 11 hp limit set for gas bikes at the Socal races.
That would put them in the Unlimited class where pretty much anything is allowed including motorcycle tires.



I totally agree with this statement





So you will be comfortable going 35 mph through the twistys on a expensive bicycle tire?
Image

May your tote always stay tight and your edge eversharp :wink:

my eTownie build thread: viewtopic.php?f=6&t=23701
User avatar
nicobie
1 MW
1 MW
 
Posts: 1815
Joined: Thu Aug 07, 2008 1:48 pm
Location: Central Coast CA,USA

Previous

Return to E-vents

Who is online

Users browsing this forum: No registered users and 2 guests