FlyingFinn
100 W
- Joined
- Jan 3, 2018
- Messages
- 210
Welcome to join this thread on FREY AM1000 and FAT1000 models. Please let’s keep this thread clean from insults and threats to your fellow writers.
FlyingFinn said:Welcome to join this thread on FREY AM1000 and FAT1000 models. Please let’s keep this thread clean from insults and threats to your fellow writers.
FlyingFinn said:A quick poll: How long has your rear cassette stood up?
Sinbord1981 said:Yeah similar - 400 miles in and I had to replace the chain and cassette. I’ve since also changed the chainring from 40T to 46T and the rear cassette from 11-46t to 11-40t. The new set up is spot on for how and where I ride. I have also changed my riding style on my AM1000 to ‘wind it up’ through the gears when taking off, rather than just using the full torque of the motor in a high gear. The chainline is improved as well - much straighter and I’m mid-cassette more of the time rather than on the smaller cogs most of the time. I never really used the two biggest sprockets on the rear either.
I’ve just ordered a new pair of tyres as well - gone for the Michelin E-Wild 27.5 x 2.8. Nice and knobbly for some serious muddy off-Road fun in the next few weeks as we’re in winter here in the UK now and it’s been very wet.
FREYebikes said:We will alsokeep to post further FREY news here in case some one would like to learn about our news.
Thank you for all friends and customers' attention and support!
Tom said:Any chance of a Black Friday / Cyber Monday promotion from Frey? I'm sure I'm not the only one hoping for some extra incentive to pull the trigger on a Frey CC or EX.
Hammer3er said:hi Guys
I'm from Germany, and I'm following this tread for a long time.
I would like to buy a Frey am1000 again in the new year.
and I have a question to owners of this bike.
is it slow to replace the shimano xt8000 circuit on sram hx-gx 11x?
what should I pay attention to in the configuration.
sorry for my english, i use googel
greeting as Germany
Hammer3er said:Hi Guys
What lighting do you use on your bike?
Do you have a recommendation for me.
Has anyone already tried Exess Controller?
https://www.exess-bikes.de/news/now-available-the-new-exess-controller
Greetings Hammer
Richard N said:It's a shame the other thread is locked.
To me, that's like tossing out the baby with the bathwater. Deal with the people that are causing the problem.
Now all of that information is going to sink to the bottom of the forum never to be seen again. What a waste, the mods should have dealt with this.
:x :x :x
FlyingFinn said:DT Swiss 350 hub freewheel after 300 kms. Need to order the stainless one asap...
SlowCo said:That is a lot of wear in such a short distance but also testament to the power of the bike :thumb:
It nice to be able to see so clear in the photo that the indents get larger/deeper towards the smaller cassette cogs where the torque on the splines is the greatest.