tonyontopofabighill wrote:Thanks GT,
I wondered if going for a ride to use up some of the charge might help,so I will do that tomorrow.What amount of charge do I put into the Accucel for the balance charge.I had it going today on 3Amps but nothing much changed and now I guess that was because the battery was already charged?
It doesn't matter as the charger will adjust down as required. I usually use 5A as the setting, but as the Accucel can only output max 150W, 4.6A is about the practical limit and the charger will only pull this while the highest cell is below 4.18V (if aiming for 4.20, or 4.08V if aiming for 4.10). Note that the balance is going to take "ages", keep an eye on it (monitor your cells 5-8).
And just to be clear, go for a ride, check the cell voltages, repeat as necessary, and stop when the highest is at 4.10V (if you are going to use the Lilo setting, else 4.20V). Do not let the lowest one go below 3.50V Then balance charge even if it takes all day!