Cannondale Crimson

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.

Re: Cannondale Crimson

Postby mclovin » Wed Sep 07, 2011 10:04 am

Matt,
What shocks do you have fited to the white Hooligan?
User avatar
mclovin
100 W
100 W
 
Posts: 184
Joined: Sat Apr 04, 2009 1:19 pm
Location: Seattle

Re: Cannondale Crimson

Postby recumpence » Wed Sep 07, 2011 11:22 am

Those are White Brothers RC80 forks.

Matt
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?
User avatar
recumpence
10 GW
10 GW
 
Posts: 4592
Joined: Sat Apr 19, 2008 8:33 am
Location: On Earth right now. That can change at any time, though..........

Re: Cannondale Crimson

Postby richmpdx » Wed Sep 07, 2011 11:30 am

Matt - It looks great in the pedal-powered mode and very serious. Are those the 20" rims you have custom ordered and offered for sale? And please also let us know the changes to the chainring and freehub.

Rich
richmpdx
100 W
100 W
 
Posts: 142
Joined: Thu May 21, 2009 5:14 pm
Location: Portland, OR

Re: Cannondale Crimson

Postby recumpence » Wed Sep 07, 2011 2:21 pm

Yes that is the same rim as the group buy rims are.

Those cranks I had lying around. They are fsa carbon cranks.
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?
User avatar
recumpence
10 GW
10 GW
 
Posts: 4592
Joined: Sat Apr 19, 2008 8:33 am
Location: On Earth right now. That can change at any time, though..........

Re: Cannondale Crimson

Postby recumpence » Sat Feb 11, 2012 10:46 am

Well, since the yellow trike is gone (sniff, sniff) I am moving forward on the Cannondale Hooligan build as my next flagship demo bike. So, to that end, I had Tommy from FFR trikes obtain a set of very custom wheels for me from Industry 9. These wheels use my 47mm wide rim in the rear and a Sun Ringle 40mm wide (IIRC) Envy front rim laced to I9's heavy duty hubs by way of custom length downhill (.110" thick) red spokes. It took a month for them to make these for me. But, the wait was worth it. They are lighter than my previous rims and I am sure they are stronger.

This bike will receive a new style motor (not telling about that just yet) and, most likely, a radical new drive based on my DaVinci (also not saying anything about that yet). :mrgreen:

I expect it to take about a month to get more goodies on hand for this and about 2 months before the motor is ready (maybe more).

I will keep you posted.

Matt
Attachments
i91.jpg
i91.jpg (137.02 KiB) Viewed 382 times
i92.jpg
i92.jpg (127.63 KiB) Viewed 382 times
i93.jpg
i93.jpg (152.12 KiB) Viewed 382 times
i94.jpg
i94.jpg (145.34 KiB) Viewed 382 times
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?
User avatar
recumpence
10 GW
10 GW
 
Posts: 4592
Joined: Sat Apr 19, 2008 8:33 am
Location: On Earth right now. That can change at any time, though..........

Re: Cannondale Crimson

Postby MattyCiii » Sat Feb 11, 2012 2:02 pm

Wow those red spokes literally look unreal... like they are photoshopped in.

Nice looking bike!
1st build: Dahon Jetstream folding bike. Quick, reliable, capable of 32mph. Light enough to lift, folds for easy transport by car/bus/train.
2nd build: RC powered 2009 Norco A-Line. Top speed 39mph. Built like a tank, it's resistant to Boston potholes, can stop on a dime, easily goes up/down curbs when necessary.
3rd build (just started): Scratch build ultimate utility bike. Based on a common power module using a NuVinci left side freewheel.
User avatar
MattyCiii
100 kW
100 kW
 
Posts: 1436
Joined: Sat May 05, 2007 2:06 pm
Location: Boston, MA, USA

Re: Cannondale Crimson

Postby farmkid4 » Sat Feb 11, 2012 3:20 pm

Amazing job the bike looks great!


cant wait to see it with the motor :!: :!: :!:
User avatar
farmkid4
10 W
10 W
 
Posts: 97
Joined: Wed Apr 13, 2011 7:07 am
Location: NY not C

Previous

Return to E-Bike Non-hub Motor Drives

Who is online

Users browsing this forum: emaayan, izeman, notger, Sussexpellett, teslanv, TriPhase and 7 guests

cron