Construction of Electric Chopper

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.

Re: Construction of Electric Chopper

Postby ilia-45 » Sun Jun 24, 2012 12:02 pm

BMS arrived :P
Image
Image
Image
Image
Image
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby XLR8 » Sun Jun 24, 2012 7:30 pm

Where did you buy the BMS?
XLR8
1 W
1 W
 
Posts: 60
Joined: Mon Aug 29, 2011 5:17 am
Location: Redlands, Queensland, Australia

Re: Construction of Electric Chopper

Postby ilia-45 » Mon Jun 25, 2012 11:27 am

I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby ilia-45 » Fri Jun 29, 2012 5:04 pm

A little update
Finally got the brakes:
Image
Image
Image
Made the mounting motor and controller,and installed them, it remains to make a few more fixtures
In the meantime some photos of the process and results
Image
Image
Image
Image
Image
Image
Image
Image
Image
:mrgreen:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby nechaus » Fri Jun 29, 2012 7:23 pm

:shock:
Magic pie Dual Suspension
Peak 6kw Air cooled
Kelly controller (mini kbs series, smaller than a coke can, can do 80+ battery amps peak, Favorite small controller. Really punchy)
20s 16ah
60 kmh,
Safe, Beautiful handling.
--------
nechaus
100 kW
100 kW
 
Posts: 1271
Joined: Tue Oct 11, 2011 7:41 pm
Location: Brisbane > AUSTRALIA

Re: Construction of Electric Chopper

Postby ilia-45 » Sat Jun 30, 2012 1:00 pm

nechaus wrote::shock:

:?:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby ilia-45 » Fri Jul 06, 2012 6:47 pm

Second engine mount :mrgreen:
Image
Image
Image
Image
Image
:P
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby Idontwanttopedal » Sat Jul 07, 2012 5:59 am

Bike look very nice you have got some skill
Idontwanttopedal
1 kW
1 kW
 
Posts: 372
Joined: Sat Jun 04, 2011 12:39 pm
Location: Essex uk

Re: Construction of Electric Chopper

Postby ilia-45 » Sat Jul 07, 2012 8:28 am

Thanks I try to to do as it should be :wink:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby ilia-45 » Mon Jul 16, 2012 5:16 pm

More mechanics . front brakes
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
:wink:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby cal3thousand » Mon Jul 16, 2012 6:14 pm

My god that is beautiful. Thanks for the images!
#1: Diamondback Menona 700c (Commuter)
M/C: e-BikeKit geared rear w/BB7 with 12FET 40A Infineon ebikes.ca
GM 48V LiFePO4 10Ah racked; moving to 12S Turnigy 10Ah framed
+ Speedict, XC30TK disc, Alex Adventurer 700c Disc, Tektro 180mm hyd. with 42mm Kenda Urban


#2: Norco VPS Six DH (Fun) WIP
M/C: Clyte HT3525 (Thanks Meth!!!) http://Methtek.com with Lyen 18FET 24S Regen
Battery: 24S Turnigy 10Ah frame (ABS)

#3: Wifey Bike, Giant eSuede fully customized WIP
cal3thousand
100 kW
100 kW
 
Posts: 1266
Joined: Mon Mar 26, 2012 4:47 pm
Location: California

Re: Construction of Electric Chopper

Postby ilia-45 » Mon Jul 16, 2012 7:09 pm

Thanks Thanks Thanks :mrgreen:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby dingoEsride » Wed Jul 18, 2012 9:54 pm

Stunning craftmanship, how does the bike go, ride etc?, some photo's vids of her in action would be cool, thanks for showing your creation
ride like the wind
User avatar
dingoEsride
10 kW
10 kW
 
Posts: 850
Joined: Thu Apr 15, 2010 2:09 am
Location: Perth, Australia

Re: Construction of Electric Chopper

Postby ilia-45 » Thu Jul 19, 2012 9:30 am

All will be eventually :wink:
and while some progress photos :mrgreen:
Image
Image
Image
Image
Image
Image
Image
:wink:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby Mithion » Wed Aug 08, 2012 6:06 pm

Absolutely EPIC!!! Do you have any newer pictures of the finished bike or any info on it?
Mithion
100 mW
100 mW
 
Posts: 49
Joined: Tue Aug 07, 2012 3:35 pm

Re: Construction of Electric Chopper

Postby Kin » Wed Aug 08, 2012 6:37 pm

Beautiful pictures here. I'm not a fan of the chopper style, but this bypasses any prejudice I would have...It's great!
New to endless-sphere? Notice a lot of signatures recommending Ebike.ca? That's because it's the best place for a quality and manageable, (but still 'real'), first build. Justin is a solid supporter of electric bike development, and a good source of equipment.

My hat off a thousand times to the green people that effectively run this forum. The ES Mods are superb.
Kin
100 kW
100 kW
 
Posts: 1195
Joined: Sat Mar 05, 2011 6:16 pm
Location: NC or MA, U.S

Re: Construction of Electric Chopper

Postby ilia-45 » Sat Oct 13, 2012 5:39 pm

Thanks to everyone who is following this project :wink:
and now a little bit of progress :roll:
Image
Image
Image
[img]http://www.chipmaker.ru/uploads/monthly_09_2012/gallery/image/gallery_4583_963_136392.jpg[img]
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby ilia-45 » Mon Oct 22, 2012 10:04 pm

Image
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby ilia-45 » Thu Oct 25, 2012 11:04 am

chain and sensors installed
Image
Image
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby ilia-45 » Thu Oct 25, 2012 8:49 pm

feel free to comment :wink:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby recumpence » Thu Oct 25, 2012 9:30 pm

Everyone is too busy cleaning up the drool from their keyboards to comment.

This build is something akin to bringing a 50 caliber anti-aircraft cannon to a BB gun competition.

Everyone is completely stunned and have no idea what to say.........

I can tell you (as one who understands machining), this is way beyond anything I have ever seen in the E-bike arena.

Matt
1% of the world's population can think "Outside the box". The rest are firmly stuck within the box. Where are you?
User avatar
recumpence
10 GW
10 GW
 
Posts: 4324
Joined: Sat Apr 19, 2008 8:33 am
Location: On Earth right now. That can change at any time, though..........

Re: Construction of Electric Chopper

Postby Thud » Thu Oct 25, 2012 9:59 pm

This one is definatly 10+ out of ten.
I am feeling like a total hack looking at your fine machine skills.
get some......

All information & advice provided by Thud are "Open Source" & free for personal use & distribution under the following agreement linked below.
http://creativecommons.org/licenses/by-nc-nd/3.0/
User avatar
Thud
10 MW
10 MW
 
Posts: 2386
Joined: Thu Aug 20, 2009 6:20 am
Location: West Michigan,USA

Re: Construction of Electric Chopper

Postby ilia-45 » Fri Oct 26, 2012 10:35 am

Oh thank you guys
Nice when people like my work
And nice to see comments in the topic :lol:
Moreover such flattering comments :shock:
I apologize for my english
User avatar
ilia-45
10 W
10 W
 
Posts: 99
Joined: Sun May 13, 2012 4:53 pm
Location: Israel Ramat-Gan

Re: Construction of Electric Chopper

Postby LI-ghtcycle » Fri Oct 26, 2012 3:11 pm

ilia-45 wrote:Thanks to everyone who is following this project :wink:
and now a little bit of progress :roll:
Image
Image
Image
[img]http://www.chipmaker.ru/uploads/monthly_09_2012/gallery/image/gallery_4583_963_136392.jpg[img]
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image



Words cannot express my amazement! :shock:

I am in awe of your skill and taste! :D

This is a One of a Kind piece of art! 8) 8) 8)

I'm really curious what kind of power that motor you will be running will produce, and what kind of speed this bike will be traveling at?

Also, what do you do for a living?!

I would think there might start being a custom E-Bike shop opening up in Israel soon!?
Thank you Justin_Le for your selfless act of kindness! We all are in your debt.

My latest build: Vision R40 with Golden Motor "800W" Trike motor as mid-drive, NuVinci N171B rear wheel as transmission, 30 MPH on 12S (46V) 12 AH Turnigy Nanotech LiPo (25-50c) able to climb tall hills on a single Amp Hour! :grin:

http://www.endless-sphere.com/forums/viewtopic.php?f=3&t=29810&p=475990#p475990
LI-ghtcycle
1.21 GW
1.21 GW
 
Posts: 3549
Joined: Sat Aug 29, 2009 11:39 pm
Location: Oregon City Oregon

Re: Construction of Electric Chopper

Postby ohzee » Fri Oct 26, 2012 3:21 pm

Yea this looks like something id expect to end up in a museum when done no ridden down the street.

impressive - I was wondering a while back how this project was going and since it looked like so much work
I figured you moved on to other things.. glad to see I am wrong. Cant wait for a video of it being ridden.

ebike porno at it's best
User avatar
ohzee
1 MW
1 MW
 
Posts: 1629
Joined: Wed Jul 20, 2011 1:13 pm
Location: Columbus Ohio USA

PreviousNext

Return to E-Bike Non-hub Motor Drives

Who is online

Users browsing this forum: eride, Megalowmax, sacko and 5 guests