Kuberg Freerider Project

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.
User avatar
madin88
10 MW
10 MW
Posts: 2331
Joined: May 27, 2013 2:02 am
Location: Austria

Re: Kuberg Freerider Project

Post by madin88 » Nov 07, 2017 1:47 pm

skeetab5780 wrote:
I did get my rear hyrdro disc brakes in the mail and I cannot wait to get a bracket welded in place to mount them! I really hate trying to ride like a hooligan without rear brakes
Do you use regen?

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Nov 07, 2017 1:57 pm

No I have not enabled regen on any of the three Kelly controllers I have, this build im not sure how good it will work with a chain tensioner in the mix, Have you any experience with a similar setup? This is not a simple hub and id rather have a brake lever if I had a choice.
Image

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Nov 29, 2017 8:17 am

Hobbyking has my batteries on sale for $77 each! Which is a complete steal! They are in the USA warehouse also...

But I am not going to buy them because they are only offering one shipping method USPS 5 days for $49.77 for only three packs!!!!

That is a complete downer...why so much shipping it makes the batteries calculate out to $94 each instead on the $77 sale

I guess I will continue to have range anxiety until after the winter is over...Bahhh

devo1223
10 W
10 W
Posts: 66
Joined: Nov 06, 2012 4:32 pm
Location: Lake Tahoe,CA

Re: Kuberg Freerider Project

Post by devo1223 » Nov 29, 2017 4:11 pm

Weird its giving me free shipping to California. Do you use those in your Vector Lite frame? Another member mentioned running 20s 20ah with 4s and 6s packs which is what I want to do but looking at the dimensions on the hobby king website I don't see how they could fit. Are the dimensions on the website accurate as far as you know?

Thanks,
Rocky Mtn switch/Lyen 18 fet/18s5p tesla cells
Mxus 3k turbo 3t in 17in moto rim
50mph

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Nov 30, 2017 8:45 am

No im using some other weak batteries on the vector light bike, i use the multi stars for the 50amp controller on this bike.

Ya im on east coast so apparently hobbyking cannot help me

I think the dimensions of packs are accurate on site, ive never had the big 20ah packs so not 100%

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Nov 30, 2017 11:29 am

Well I'm an idiot I guess, because I went back to Hobbyking today and the FedEx shipping was actually FREE!!!

So I bought another 3x 6s 12000mah multi packs! So I will have 18s 24ah now! pretty awesome

Thanks for the help forum!

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Dec 04, 2017 9:21 am

Started working on this voltage display I bought 6 years ago! Haha one of these days I will have a bike with a volt meter...

Using an old iphone 5 case to mount this display
Image
Had to add some wiring to make it look pretty
Image
Soldered them on real fast
Image
Slapped it together now I have to find something to cover it with
Image

User avatar
DanGT86
10 kW
10 kW
Posts: 548
Joined: Sep 06, 2012 9:18 pm
Location: Saint Louis MO

Re: Kuberg Freerider Project

Post by DanGT86 » Dec 04, 2017 10:56 am

You could use an otterbox or lifeproof iphone case to cover it. They are fully enclosed since the are waterproof. You could run the wires through the charging port hole.

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Dec 07, 2017 9:26 am

That is a pretty good idea, but those cases are probably more $$ than the display!

I will just hack some ugly cover and glue the crap out of it! More my style :)

User avatar
Saku
1 µW
1 µW
Posts: 1
Joined: Dec 10, 2017 6:13 am

Re: Kuberg Freerider Project

Post by Saku » Dec 10, 2017 7:23 am

Great Project!!! :)

Where did you buy alone frame?

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Dec 11, 2017 2:14 pm

Thanks I got the frame and parts from the only USA distributor of the bike

Its in CA called Adventure Designs

User avatar
skeetab5780
1 MW
1 MW
Posts: 1845
Joined: Jun 15, 2009 10:58 pm
Location: MA
Contact:

Re: Kuberg Freerider Project

Post by skeetab5780 » Dec 12, 2017 10:15 am

Batteries came in!
Image
Image
My favorite tape!
Image

Post Reply