Hello,
I finished my second Ebike Projekt (first was a TSDZ2 build) and wanted to share the results here hoping to inspire others. Special thanks to all forum members who helped me (Spinningmagnets, D8ve, Amberwolf, Fetcher...). Would have been much more difficult without.
First some impressions:
The base bicycle was already a top of the line 28" simplon full carbon ebike, so it was hard for me to mess this completely up. Motorization is achieved with the tiny Xiongda YTW-06 Motor, 48V, 350W Max and just 1.6Kg (measured). Controller is lishui, and the display is from topology, specially programmed to work with the lishui controller. There is an output for a throttle, but I don't really need it.
More on the battery later.
I finished my second Ebike Projekt (first was a TSDZ2 build) and wanted to share the results here hoping to inspire others. Special thanks to all forum members who helped me (Spinningmagnets, D8ve, Amberwolf, Fetcher...). Would have been much more difficult without.
First some impressions:
The base bicycle was already a top of the line 28" simplon full carbon ebike, so it was hard for me to mess this completely up. Motorization is achieved with the tiny Xiongda YTW-06 Motor, 48V, 350W Max and just 1.6Kg (measured). Controller is lishui, and the display is from topology, specially programmed to work with the lishui controller. There is an output for a throttle, but I don't really need it.
More on the battery later.