For Sabvoton sine wave motor controller users

Electric Motors and Controllers
Jorge Rocha
100 µW
100 µW
Posts: 9
Joined: Feb 24, 2016 8:18 pm

Re: For Sabvoton sine wave motor controller users

Post by Jorge Rocha » Nov 22, 2017 8:53 pm

Mine has the source of variable regenerative braking. Check if there is any difference between yours and mine. Places a photo of the pcb.

Jorge Rocha
100 µW
100 µW
Posts: 9
Joined: Feb 24, 2016 8:18 pm

Re: For Sabvoton sine wave motor controller users

Post by Jorge Rocha » Nov 22, 2017 8:54 pm

Mine has the source of variable regenerative braking. Check if there is any difference between yours and mine. Places a photo of the pcb.
Manny wrote:
Nov 22, 2017 7:34 am
good to know. I whas wondering if someone knows the connection for the second throttle? for the variable regen

Manny
1 W
1 W
Posts: 63
Joined: Nov 23, 2011 7:14 am
Location: The Netherlands

Re: For Sabvoton sine wave motor controller users

Post by Manny » Nov 28, 2017 4:27 pm

took my sabvoton apart to check the connections.
Sabvoton_io.jpg
Sabvoton_io.jpg (153.98 KiB) Viewed 77 times
made a google doc to track the connections of the sabvoton
Sabvoton_io_2.jpg
Sabvoton_io_2.jpg (58.77 KiB) Viewed 77 times
J6 and J26 have pin 1 on the right side. J7 and J3 have pin 1 on the left side.

it wold be nice to complete the pinout.

Manny
1 W
1 W
Posts: 63
Joined: Nov 23, 2011 7:14 am
Location: The Netherlands

Re: For Sabvoton sine wave motor controller users

Post by Manny » Dec 02, 2017 3:46 am

update to the pinout added the 5V+ and gnd
sabvoton_2.PNG
sabvoton_2.PNG (18.59 KiB) Viewed 57 times

User avatar
alec
100 mW
100 mW
Posts: 37
Joined: Dec 01, 2017 5:57 pm
Location: Yosemite, Calif.

Re: For Sabvoton sine wave motor controller users

Post by alec » Dec 08, 2017 2:23 am

Manny wrote:
Dec 02, 2017 3:46 am
update to the pinout added the 5V+ and gnd
sabvoton_2.PNG
Thank you so much for this, Manny!

Now if only we could get the software to work correctly...
"Black Widow" Greyborg [v.2] | Cromotor [v.3] | Greentime 1440 | 24s EIG cells 12kW peak (thread coming soon)
Project(s) in works: FatCON (& DIY Serial/USB to Bluetooth)

Post Reply