Low KV Q128H at ridiculously high voltage? Which one (Alps)?

Electric Motors and Controllers
Pete1961
10 W
10 W
Posts: 72
Joined: Dec 28, 2008 6:27 am
Location: Telford UK

Re: Low KV Q128H at ridiculously high voltage? Which one (Al

Post by Pete1961 » May 18, 2015 4:04 pm

It might be just my settings but I cannot get the details to open on the Adana site, See from the company news they have a 100Nm motor. Also that this company mentions a 800 to 1200W motor with a 1600 - 2400W motor under development (think it is brushless gearless aimed at the scooter market)
http://www.tsbicycle.net/products_detai ... d=120.html
I am interested in anything that could drive a 2 seater tricycle / light car with a single rear motor wheel, only other possible contenders I know of are the Xlyte 5304 or 600 series direct motors. It is frustrating that there are no torque / speed graphs on the sites

Buk___
1 kW
1 kW
Posts: 382
Joined: Jul 28, 2017 5:59 pm

Re: Low KV Q128H at ridiculously high voltage? Which one (Alps)?

Post by Buk___ » Jan 02, 2018 6:18 am

fellow wrote:
Apr 02, 2015 10:32 pm

Does 48V version Q128H use this (like Q128H 36V does):
Image
Old thread, but...Are you sure that the gearset in the image above is from a Q128H? Not (say) a Q100H?

Post Reply