Sticky thread index for "Motor Technology"

Electric Motors and Controllers
Locked
User avatar
spinningmagnets
100 GW
100 GW
Posts: 10723
Joined: Dec 21, 2007 10:27 pm
Location: Ft Riley, NE Kansas

Sticky thread index for "Motor Technology"

Post by spinningmagnets » May 25, 2015 8:06 am

Please be patient as this information storage will be organized over time. Any moderator may feel free to unlock and expand/re-arrange/improve as you see fit...

"Motor PICTURE links, disassembled, hub and non-hub"
https://endless-sphere.com/forums/viewt ... 16&t=54935

"How to Determine the Wiring for a Brushless Motor" (Fechter, cross-post from tech reference section)
https://endless-sphere.com/forums/viewt ... =16&t=3484

"Re-wind of a turnigy 80/100 (Now-tutorial w/Video)" (Thud, 17 pages)
https://endless-sphere.com/forums/viewt ... 30&t=20618

"Lebowski's motor controller IC, schematic and setup manual" (Lebowski, 48 pages)
[plus index in first post, to all Lebowski threads]
https://endless-sphere.com/forums/viewto ... 30&t=36602

"Adding hall sensors to outrunners" (Burtie, 16 pages)
https://endless-sphere.com/forums/vi ... 30&t=15686

"mounting hall sensors to R/C brushless motors" (georgeycc, 11 pages)
https://endless-sphere.com/forums/vi ... =30&t=9061

"Timing Adjustment Tool" (Burtie, 18 pages)
https://endless-sphere.com/forums/viewto ... =2&t=19054

"Optical sensors for commutation -Working" (Burtie, 4 pages)
https://endless-sphere.com/forums/viewto ... =2&t=28966

"Adding burtie internal optical sensors to Astro 3210" (http://www.recumbents.com, one page)
https://endless-sphere.com/forums/viewto ... 28&t=39035

"ES Motor Project?" (Miles, 8 pages)
https://endless-sphere.com/forums/viewto ... 30&t=40092

"DIY 10awg phase leads through axle in 9C hubmotor." (liveforphysics, 5 pages)
https://endless-sphere.com/forums/viewto ... =2&t=14580

"Building a DIY triple stator axial flux motor" (Lebowski, 8 pages)
https://endless-sphere.com/forums/viewto ... 30&t=46476

User avatar
spinningmagnets
100 GW
100 GW
Posts: 10723
Joined: Dec 21, 2007 10:27 pm
Location: Ft Riley, NE Kansas

Re: Sticky thread index for "Motor Technology"

Post by spinningmagnets » May 25, 2015 8:06 am


User avatar
spinningmagnets
100 GW
100 GW
Posts: 10723
Joined: Dec 21, 2007 10:27 pm
Location: Ft Riley, NE Kansas

Re: Sticky thread index for "Motor Technology"

Post by spinningmagnets » May 25, 2015 8:06 am

reserved for future moderator or guru use

Locked