Cromotor test

steven7601

10 W
Joined
Apr 22, 2017
Messages
81
How can I test my motor to make sure its ok I recently bought a new 24f 120volt controler and when I hooked everything up I get nothing. I am using 3 6s lipo for 72volts and have all the wires going to their corresponding colors (halls are red to red blue to blue and so on same with the phase wires please help me.
 
Your new 120 volt controller may have a low voltage cut off that is higher than the max volts of the 18 series pack.
As for direct matching of the wire colors that rarely will be the correct combination.

Good luck
 
Back
Top