middrive motor, small and powerful -> Neu 8057/75 or??

Electric Motors and Controllers
Post Reply
User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Oct 20, 2017 1:02 pm

I would like to convert my Votec bike, which is currently powered by an MXUS 3k hub, to a middrive.

The main reason i want to give away the hub is the poor handling at uneven roads. The whole bike is shaking like hell if the road is bumpy and uneven. There are no issues with the fork or the damper, the only thing which might be not optimal in terms of suspension physics is the low weight of the frame.
It is about 25kg (frame with all parts + battery) fighting against 13-14kg of unsprung mass (motor + rear wheel). Aside from my personal experience this is also in theory anything but optimal.
When i am driving over potholes it comes through quite hard and rough, and the quick road irregularities are not filtered well. the wheel simply cannot follow the surface quick which leads to a very uncomfortable ride than.

My plan is to install the motor on a bracket which will be welded to the swingarm. The problem is there is limited space, so motors like the BigBlock's won't fit, and because i do not like to power it over the chainring on the pedals, units like BBSHD or Lightningrods are no option.

I am thinking of going with a belt drive with about 7:1 reduction (or a bit more even). Belt drive because of the possibility for regen :)
If the diameter of the motor is below 110mm, it should fit without touching the frame if the damper is full compressed, so i started to search for such motors.

first candidate:

- NeuMotors 8057/75

https://neumotors.cartloom.com/storefro ... uct/126891
http://www.leomotion.com/pi.php/LEO-L8057-075.html

It is a 16P motor and somewhere stands "18S16p" so i think it has 18 teeth (but not confirmed).
as the name says the size is 80mm dia x 57mm wide with a kV of 75 (optimal for my 20s battery).
the rpm range is 4000-8000

other specs:

Case Length 92mm
Diameter 99mm
Weight 2660g
Stator diameter 80mm
Stator length 57mm
Shaft Diameter 14mm
Mounting 6x 56xM6mm
Kv 75U/V
Internal Resistance: 24mOhm
Idle Current: 1.6A @ 10V
Limit (15s): 20'000W
poles: 16 (8 pairs)

At the moment the price is 399USD for the motor and about 60USD for the necessary front mount axle:
http://www.leomotion.com/shop/USER_ARTI ... el_ID=8566


Image

Image

the 8057 is on the far right:

Image

things to find out for the NeuMotor:

- how is the cogging of 18S16p design (or torque ripple?)?
- would it be possible to install hall sensors?

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Nov 01, 2017 8:32 am

more pics:

Image
Attachments
neu 1.jpg
neu 1.jpg (9.01 KiB) Viewed 709 times
neu2.jpg
neu2.jpg (4.16 KiB) Viewed 709 times

User avatar
wineboyrider
100 MW
100 MW
Posts: 2924
Joined: Sep 30, 2009 9:08 am
Location: Tularosa, New Mexico
Contact:

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by wineboyrider » Nov 01, 2017 8:51 am

Controller?
ES IS SAVED! THANK YOU JUSTIN.

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Nov 01, 2017 9:19 am

wineboyrider wrote:Controller?
It would need hall sensors, than it should "work" with most e-bike controllers.
Things like back-EMF waveform or inductance are also important to know for choosing the optimal controller.

the 16pole design would require "only" 64000 ERPM for maximum specified RPM which is a big advantage compared to other large RC motors.

Alex07
100 W
100 W
Posts: 115
Joined: Jun 27, 2016 4:00 am

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by Alex07 » Nov 04, 2017 8:43 pm

did you manage to put hall sensors on it ?

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Nov 05, 2017 5:09 am

I don't own the motor yet, but i don't see a problem adding halls if they can be installed between the teeth. Need to find out if they can.
I asked Leomotion (NeuMotor dealer) about the coggin and motor data.

here ya go:
805775.png
805775.png (4.37 KiB) Viewed 625 times
the data is "calculated", whatever that means, but it looks promising.
The cogging is quite high they reckon which prevent ma a bit of buying one aside from the missing halls.

This motor should play in a different league than Hobbyking, Alienpower stuff or other china RC motors, and the price is still half of a Hacker Q100 motor.
Also the large 14mm axle with rear mount option makes it a fantastic choice for a mid-drive.

litespeed
100 kW
100 kW
Posts: 1233
Joined: Aug 11, 2010 4:42 pm
Location: St. Charles, Missouri

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by litespeed » Nov 05, 2017 10:07 am

When I first got into R/C helicopters Neu motors was the top dog. I ran a 1917 1Y when all the outrunners were still baking themselves. It had a tramendous amount of cogging which never bothered me a bit on a helicopter, plane or car/truck. Also back when controllers didn't have a great slow start and it would spin the Heli almost a full turn which would wake you up in a moment. :shock: I had to send mine in to get repaired because the shaft was only epoxied in......came loose on a hard climb out once....never did it again.

I seem to remember when Steve Neu visited the r/c forums he/they would do custom work as far a winds and custome mechanical changes such as shafts and longer can/stators. Maybe they would add the halls for you?

4400 series looks good as well although has more slots.....has 10K continous and peaks of 20k watts.

Looking forward to your findings.

Tom
I'm married so you know I'm no stranger to pain!

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Nov 05, 2017 1:23 pm

litespeed wrote: 4400 series looks good as well although has more slots.....has 10K continous and peaks of 20k watts.
yeah i have seen it, but i think the RPM is to high for a 1-stage reduction and it costs twice as much. Also the bearing looks much smaller compared to the L80xx series.
The design looks similar to Astroflight motors, but much larger and more powerful.

I came across the AWESOME eCalc torquecalc Motor Finder:
https://www.ecalc.ch/torquecalc.php

Choose a motor, type in Torque and RPM and you'll see how it performs.

There is even a Joby JM1, Hacker Q100 or A150 at choice.

User avatar
macribs
1 GW
1 GW
Posts: 3129
Joined: Jul 22, 2014 5:59 pm

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by macribs » Nov 15, 2017 6:47 am

I saw a video on this motor, 20 kw is pulled from thin air. About half that in real world peak power.

Iirc you do machining, and have done axles before? Those motors seems to relatively thin, could you double to power if you run two of those on one axle? One controller to each motor, they will sync automatically. Should give you double the fun :)

miuan
100 kW
100 kW
Posts: 1035
Joined: Nov 26, 2009 4:16 am
Location: Slovakia

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by miuan » Nov 15, 2017 8:43 am

Hi Madin,

I really can't help with belt drives, but before you get into all the trouble of building one, have you tried a MAC on the Votec? I really love the MXUS 3k on my steel fatbike (pic attached). Road bump filtering with the 4 inch tyre is second to none. Even for light trails, the fatbike rides fantastic and you can barely feel the trail chatter as it plows thru everything. For commuting on a full suspension bike with regular tyre, I would definitely choose a lighter hubmotor like the MAC/BMS/BPM, unless you plan to ride a lot off road. You may lose the crude power that MXUS motor delivers, but will be rewarded by a more natural feeling ride, simplicity and reliability.

Viktor
Attachments
fatbike_s.jpg

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Nov 15, 2017 2:10 pm

macribs wrote:I saw a video on this motor, 20 kw is pulled from thin air. About half that in real world peak power.

Iirc you do machining, and have done axles before? Those motors seems to relatively thin, could you double to power if you run two of those on one axle? One controller to each motor, they will sync automatically. Should give you double the fun :)
do you have a link to the vid?

the peak power is always "a thing like that"
Anyway, i already would be happy with 10-12kw peak power.
This is no typical RC motor, it was made for industrial usage and last year offered to the RC crowd. The axle and bearings looking super robust to me.

btw: regarding eCalc this motor performs better as the Hacker Q100-L (which costs 1100€) and also better as the Joby JM1 (which was mentioned already sometimes here in the sphere).
You can choose the motors in the drop down menus. You just need to type in RPM and Nm and voila you get the result.
I don't know if the numbers are 100% correct, and they may be differnt revisions of Joby motors, but the program at least does tell this.

User avatar
macribs
1 GW
1 GW
Posts: 3129
Joined: Jul 22, 2014 5:59 pm

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by macribs » Nov 15, 2017 4:57 pm

Yeah I will look for the video and post a link. If you do some additional fan/blades to aid w cooling 10-12 kw should be possible. Maybe even a hair more for a few seconds. If these are made for industrial usage then for 20 kw I would assume liquid cooling of some sort? Or possible hi speed fan(s) as nobody would care about noise in an industrial setting, at least noise would be tolerated much more so then for e-bikes.

What is the price of this motor?

Missed the price earlier. Yeah really not a good choice to use for dual motor at that price.

litespeed
100 kW
100 kW
Posts: 1233
Joined: Aug 11, 2010 4:42 pm
Location: St. Charles, Missouri

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by litespeed » Nov 15, 2017 10:18 pm

I think I need one of these.

Tom
I'm married so you know I'm no stranger to pain!

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Nov 16, 2017 12:29 pm

macribs wrote: Missed the price earlier. Yeah really not a good choice to use for dual motor at that price.
why dual motor?
i guess this idea came in your mind because some pics are showing the smallest version of the L80 with 19mm stator width, but this thread is about the large one which has a 3 times wider stator.
When searching the net i could not find much about those motors at all, so i added pics of what i could find.
The Price?
Man, if it can do at least close to what eCalc says, than it would be worth every cent.

I was told that data from Neumotors is often without controller, and other RC motors are usually bench tested incl. controller losses which might explain the higher peak ETA compared to other motors in the calculator.

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Nov 18, 2017 9:34 am

miuan wrote:
Nov 15, 2017 8:43 am
Hi Madin,

I really can't help with belt drives, but before you get into all the trouble of building one, have you tried a MAC on the Votec? I really love the MXUS 3k on my steel fatbike (pic attached). Road bump filtering with the 4 inch tyre is second to none. Even for light trails, the fatbike rides fantastic and you can barely feel the trail chatter as it plows thru everything. For commuting on a full suspension bike with regular tyre, I would definitely choose a lighter hubmotor like the MAC/BMS/BPM, unless you plan to ride a lot off road. You may lose the crude power that MXUS motor delivers, but will be rewarded by a more natural feeling ride, simplicity and reliability.

Viktor
The MAC definitely would not suit my needs in terms of power and furthermore regenerative braking is not possible with those geared motors.
Regen is a must have.

A short while ago i pushed a bionx D-motor to the limits. It is aside from the grin tech all axle hub the most optimized direct drive hubmotor you can get these days with only 4kg. Unfortunately this D-motor makes an ugly noise above a certain RPM probabaly due to its high pole design, and it seems to have very limited torque output.

I have rode a fat bike similar to yours also with MXUS motor. You have right that those large tires are quite good in filtering bumps, but from my experience it works only for VERY SMALL road irregulations.
When i was riding over large bumps or corrugations, the mass of the motor is still very noticeable.

It goes off like this:
when you riding over a bump, the tire compresses like a spring exactly at this moment because the heavy hub motor cannot follow the road surface. than, after you rode over the bump, the tire decompresses and is pushing the hub away from the bottom. In this moment you have almost no traction.
It isn't a problem if you riding straight forward, but there is high risk of loosing traction when cornering (don't ask why i know :lol: )

As you see in my pic i am actually a hub motor guy, but now i like to try something different with the expectation of much more riding comfort with similar performance to a QSV3 or MXUS 3k.
I think the Neu 8057 can make it possible (of course with proper reduction) with the weight of only 2,7kg which is even than no more located in the rear wheel.

I am still looking for a belt drive.
recumpence told me that for his Astro davinci drives he got the pulleys custom made my pfeiffer industries, but they are $$$$
here is a pic of his trike:
http://www.pfeiferindustries.com/timing ... -l-en.html

there would be also a complete belt drive available from zero motorcycles (but probabaly a bit overkill for my app, and it woud need a differnt motor pulley and adapter mouting the rear pulley to the hub):

http://www.zeromotorcycles.com/shop/ind ... brelhg6sg4

Image

User avatar
macribs
1 GW
1 GW
Posts: 3129
Joined: Jul 22, 2014 5:59 pm

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by macribs » Nov 18, 2017 11:13 am

Would timing belt and pulleys from a car engine work? Those timing belts usually good for at least 100K km, and they are routed in the most peculiar ways and still keep on spinning. In the auto industry there are various manufacturers that makes unofficial parts that often comes close in regards to quality and life span, but that a whole lot less expensive then buying big brand name parts or worst of all "original parts" that no auto maker actually manufacturer themselves they just buy bulk and use their own branding.

Disregard my post about real world power, I've not been able to locate the video and my brain is working slowly these days. Could have been I saw a video of a different model or even a different make. Searching for video by model number turned up nothing. Hey if we ain't got a video it didn't happen ;)

litespeed
100 kW
100 kW
Posts: 1233
Joined: Aug 11, 2010 4:42 pm
Location: St. Charles, Missouri

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by litespeed » Nov 18, 2017 11:23 am

What controller would you run madin88?

Tom
I'm married so you know I'm no stranger to pain!

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by madin88 » Dec 02, 2017 7:03 am

litespeed wrote:
Nov 18, 2017 11:23 am
What controller would you run madin88?

Tom
I would try it with what i have after adding halls, which would be Adaptto Max-E and a Powervelocity 12F.
A Kelly KBSX with high speed firmware should work well but it has only speed based throttle.

The coming controller from VasiliSk doesn't look bad and it can do 90kERPM which would be more than enough for this 16p motor.
If FOC is ready i will definitely buy one.

viewtopic.php?p=1332074#p1332074

User avatar
Wheazel
10 kW
10 kW
Posts: 975
Joined: Nov 02, 2010 2:30 pm
Location: Sundsvall, Sweden

Re: middrive motor, small and powerful -> Neu 8057/75 or??

Post by Wheazel » Dec 04, 2017 3:21 am

Hi Madin88

If you go the beltdrive route, you can manufacture the large pulley from a metallic hub and spokes with a 3dprinted belttrack in segments depending on printersize. As there are so many teeth gripping on the large pulley, a properly made 3dprinted one out of abs/petg/ or even pla should work well. I have good experiences with printed pulleys, and there are examples on the tube as well.

The upside is ofcourse cheap price and customizability.

Post Reply