Ebike motor/controller hall/phase/throttle tester $29

[Gordo]

edit; as requested

[NeilP]

I always thoughtvit was more a 'logic' thing
1 being signal high or On
0 being signal low or Off

in the dawn of computers, when they were faceless boxes with no screen or keyboard, they were programmed with a series of switches in binary. strings of 1 & 0
When the switch was On and a "1" was being programmed, a light also.came on so the switch positions could be checked by comparing light sequence with what was on paper

Maybe this convention came from before then, but, this is how I always remember it when I see a switch labelked like that

[Gordo]

edit; as requested

[jonathanm]

it's 1/0 (one / zero) not I/O (eye / oh).

If it was Ein/Aus it would E/A, surely. Anyway German for one is eins with an s on the end.

source: lived in Germany and married one of em.

[NeilP]

Ah ok when you wrote

[
./ ?

I took it as
.|
and that the smilie and question mark were just part of your message

I have a tester like this also and as the battery worked fine from what I remember, I did not siffer the same as you, I just flicked the switch and started using ig

[alsmith]

-Mine was the same- it worked straight out of the box. But it's a chinese made battery with no expiry date, usually no capacity rating is shown on the battery or the makers site, so first stop is the bin- the only batteries that I've had leakage problems with for many years now are this kind.

This tester is probably in a toolbox most of the time so there's a chance of leakage damage (Like everyone I know I don't remove batteries from equipment not used for long periods despite manufacturers small print warnings in instruction manuals) so the cheap battery goes and a better brand name one used.

[ohzee]

just paid for one look forward to it - nice product nice price thanks.

[Lyen]

Hi Ohzee,

Thank you for your purchase. I have just shipped your tester at the local post office. The tracking number has been placed on your PayPal account.

Best Regards,
Lyen

just paid for one look forward to it - nice product nice price thanks.

[Floont]

I just purchased a controller tester from you using my wife's PayPal account.

Of course, I shipped my damaged Lyen controller to you about 2 weeks ago and also purchased another identical controller from you. So, I'm looking forward to testing this product.

[sol_schr]

Hello,

Are there any of these testers left?

Thanks.

9/1/2011 PayPal Payment Sent

Thanks.

Greg

[Floont]

Received tester very quickly!

Thanks.

Looking forward to receiving my new controller I bought and my old controller back fixed.

[Evoforce]

Thanks Lyen!

[Floont]

Once you read the directions on how to use the tester (and believe me please read the directions), this tester is invaluable. I don't know how I would have tested my hall sensors and throttle without it.

Thanks, Lyen!

[auraslip]

1) The motor testing LEDS move far too fast to determine if they're moving the proper order or direction.

2) How do you use this to determine the correct hall/phase sequence. I'm seeing three LEDS light up when testing the phase/hall controller.

[teklektik]

1) The motor testing LEDS move far too fast to determine if they're moving the proper order or direction.

When you turn the wheel and are testing a gear motor, the normal 5:1 planetary gearing works in reverse so you get a 1:5 speedup and the LEDs go like crazy. It seems to primarily be a DD test, but as long as all LEDs light for your gear motor you are okay (even if you can't see them stepping nicely).

I'm thinking maybe you have a MAC or BMC...

[stripedtuna]

1) The motor testing LEDS move far too fast to determine if they're moving the proper order or direction.

2) How do you use this to determine the correct hall/phase sequence. I'm seeing three LEDS light up when testing the phase/hall controller.

When you test the motor halls with a geared motor, what happens if you move the wheel very slowly, as in a few mm's at a time? Does that then show you the hall sequence better?

Also, when you do the motor winding / phase wire test on a geared motor, what is the expected behaviour of the top row of motor lights?
Edit: I just re read jateureka's instructions, which mentioned that all three top row lights may glow at once with the geared motors.. Thanks..

What does yours do when the phase wires are hooled up and tested Auraslip?

I am curious as my first build is going to be the mighty Mac..

Cheers,

Ed.

[999zip999]

Hi Lyen do you still have the testers. Thanks

[Lyen]

Hi Lyen do you still have the testers. Thanks

Yes, I do.

[999zip999]

Got my tester today. Order on saturday. That's FAST. But can you keep up with my bike. Where can I find the directions. Thanks

[richirich1113]

Lyen is awsome, i like his shipping- its always been fast for me.

You can find the instructions on this thread.

viewtopic.php?f=31&t=20413&start=15

[wojtek]

got it a year ago, but just really got to it today. replaced the connectors to be compatible with my setup. great device!!!!

i did all tests: halls, phase wires, throttle all working fine

but when i engage the throttle, there are no lights on the right handside [6leds in circle]

Just ordered a PC interface cable to check what V is my controller set up for [gave mine to a friend with another controller]

BUT if the voltage of the battery was lower than setup in controller, would this test fail?

thanks!

[RallySTX]

If the voltage of the battery is lower than the cutoff or LVC of the controller, the controller outputs would go dead. That's my understanding anyway.
Brian L.

[e-biker]

hello Lyen
I got my tester today it looks cool cant wait to figure out how to work it!

[goinmobile]

Lyen : How do I purchase your tester other than paypal? Visa # by phone is the only way I buy. My banker warned me on paypal, "3rd party account access is stupid". I believe him. Tried contact by email. no response.

[goinmobile]

Thanks for the PM on payment options Lyen, order will follow. Old fashion snail mail paper trail is fine with me. Total trust in this vendor.

I do third party payment, but only with a prepaid Visa over the phone, no connection to my bank account or "secure" account numbers for internet cyber crime to steal down the road. Also the sucker options avialable from paypal that results in an "illegal" action, a license to steal your money.

Small biz may not afford costs or un-timely payment of Visa compared to Paypal.

Thanks Lyen for the low cost of your products.