Crystalyte HT3525 - Sold

Place for dealers to post items for sale.

Crystalyte HT3525 - Sold

Postby Alan B » Thu Dec 29, 2011 1:07 pm

My plans have shifted, so here is a brand new Crystalyte HT3525 rear hubmotor factory laced into a 26" MTB rim. It is from MethTek.com and has the inspections and wiring protection mods that Patrick does on his motors.

This motor has not been installed, test fit or powered. It is still in the original Crystalyte wheel bag and I have the original shipping box.

The rim is factory 26" Crystalyte Mountain Bike type with heavy spokes. It is a strong wheel.

Image

$350 plus UPS shipping and insurance
Last edited by Alan B on Fri Jan 06, 2012 7:27 am, edited 4 times in total.
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Alan B » Sat Dec 31, 2011 9:48 pm

$345 plus UPS shipping and insurance
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Science Faction » Sun Jan 01, 2012 5:06 am

Happy New Year

Is the rim the standard Crystalyte rim?
Can I have an estimate on freight to Byron BAy NSW 2481 Australia please?

Cheers
Paul
Science Faction
1 W
1 W
 
Posts: 57
Joined: Mon May 18, 2009 10:23 pm

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Alan B » Sun Jan 01, 2012 6:18 am

Rim is standard factory, it says Crystalyte on it.

I will have to find out about shipping cost to Australia.
Last edited by Alan B on Sun Jan 01, 2012 6:23 pm, edited 1 time in total.
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Alan B » Sun Jan 01, 2012 4:15 pm

Shipping to Australia appears to be about $200.
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Alan B » Sun Jan 01, 2012 6:23 pm

Added photo to post #1, this is still available.
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Whiplash » Sun Jan 01, 2012 10:45 pm

What's the max amps these will take and what is the rpm/volt of this motor??
Power is a fascinating thing, the more you have, the more you want, but the real power is having the restraint not to use it all at once...............Um...Yeah..

The harder you work.....The luckier you get!!

"People who say it can't be done are often interrupted by those that have already figured out how to do it!"

Email me @ currentcycles@gmail.com
OR check out http://www.CurrentCycles.net
User avatar
Whiplash
1 GW
1 GW
 
Posts: 3048
Joined: Mon May 10, 2010 2:55 pm

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Alan B » Mon Jan 02, 2012 12:12 am

This motor has the diameter of a 9C but laminations and magnets are about 35mm instead of 28mm wide. So it has about 25% more torque and power than the 9C.

The HT3525 winding is supposed to make 25 km/h at 36V in a 26" wheel. Kv listed here as 7.25 RPM/V, though that may not be the final number:

viewtopic.php?f=2&t=24593&hilit=crystalyte+ht3525

Luke's Dyno testing showed the power capability of this motor is about 10KW output:

viewtopic.php?f=2&t=27020&hilit=motor+plasma
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Alan B » Mon Jan 02, 2012 4:11 pm

Wheel is now boxed and ready to ship.
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby richirich1113 » Thu Jan 05, 2012 4:18 pm

Is the motor sensored or sensorless? I cant tell by the picture.
Also are you sure its not a 3540 because the spokes on the 3525 on methtek's site do not match the rim you have pictured?
KHS full suspension - 26x 2.5 Maxxis Hookworms
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
User avatar
richirich1113
100 W
100 W
 
Posts: 221
Joined: Tue Dec 27, 2011 7:03 pm
Location: Port Angeles, Washigton

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby Alan B » Thu Jan 05, 2012 4:36 pm

It is sensored.

It was sold to me as HT3525, so I presume that is correct. Purchase was October, it is listed in the thread here:

viewtopic.php?f=31&t=31145&start=45
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby richirich1113 » Thu Jan 05, 2012 4:47 pm

Im thinking but im not sure if i could afford it.
If you go to methteks site it definatly looks like the 3540 the spokes on the3525 are way different. Maby they have their pictures messed up?
KHS full suspension - 26x 2.5 Maxxis Hookworms
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
User avatar
richirich1113
100 W
100 W
 
Posts: 221
Joined: Tue Dec 27, 2011 7:03 pm
Location: Port Angeles, Washigton

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby neptronix » Thu Jan 05, 2012 5:09 pm

Guys, this is a very fair price. I'm surprised that this is still for sale.

For the love of god, someone snatch this up, or i will.. in anger :)
ES facebook group: https://www.facebook.com/groups/125035107565566

The all-arounder: 8T MAC motor on a Trek 4500.
The new all-arounder: Bafang BBS02 on a Turner O2 full suspension.
The wheelie machine: 20" Rear Magic Pie II on a Trek 4300 MTB
The Bus: ??? on a 'da bomb' cargo bike frame

Pro-tips for noobs: Charge RC Lipos to 4.15v, stop discharging at 3.5-3.6v | Use torque plates/arms! | Rear mounted hubs are always best
User avatar
neptronix
100 GW
100 GW
 
Posts: 11350
Joined: Tue Jun 15, 2010 5:56 pm
Location: Salt Lake City, Utah

Re: Crystalyte HT3525 hubmotor in 26" rim

Postby richirich1113 » Thu Jan 05, 2012 7:59 pm

PM sent with a counter offer.
KHS full suspension - 26x 2.5 Maxxis Hookworms
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
User avatar
richirich1113
100 W
100 W
 
Posts: 221
Joined: Tue Dec 27, 2011 7:03 pm
Location: Port Angeles, Washigton

Re: Crystalyte HT3525 rear hubmotor in 26" rim - SPF

Postby methods » Fri Jan 06, 2012 3:05 am

The pictures on my website are backwards at the moment... Someone just pointed that out the other day. I need to fix that....

I will extend the "cut wire warranty" that he had to whomever buys this motor. This warranty does not cover overheating but it does mean that I will replace your motor free of charge if you have a failure related to "cut wires". In case you dont know - some of the early motors sold by a lot of different retailers had an issue where the dust washer would cut into the wire bundle and kill the halls.

These motors do not have that problem - I guarantee it :mrgreen:

Put 18S lipo on this at 80A and you will be very happy.
(you can easily mod any 12 fet ebikes.ca controller to 80A right out of the box)

-methods
Stardate: -308532.98585743276
I am willing to work full time for bitcoin. Right here… right now.
Show me what you've got: Personal Website
User avatar
methods
10 GW
10 GW
 
Posts: 4649
Joined: Fri Aug 08, 2008 12:08 pm
Location: Santa Cruz CA

Re: Crystalyte HT3525 rear hubmotor in 26" rim - SPF

Postby Alan B » Fri Jan 06, 2012 7:25 am

What can I say, great support!

Payment received, looks like this one is sold.

Thanks!
-- Alan W6AKB eESP, GreyBorg, eBikeE BMC, myEbikes, ezPCBs and Thanks to ebikes.ca for rescuing this forum!
User avatar
Alan B
10 GW
10 GW
 
Posts: 4584
Joined: Sat Sep 11, 2010 7:43 am
Location: San Francisco Bay Area, USA


Return to Items for Sale - New

Who is online

Users browsing this forum: douglashart, skywriter and 4 guests