FS: A123 ANR26650M1A cells NEW PRICE 6$ cell shipped

[migueralliart]

Got started on the second batch will probably have 100 packs by the end of the week....

Anybody interested just PM me I respond fast and ship fast as well.

[sangesf]

Could ya respond to my PM?

[migueralliart]

Could ya respond to my PM?

I just checked my pms there is nothing new there.

[methods]

Could ya respond to my PM?

Check your outbox - some times the server gets reset and things disappear.

If it is in your outbox - it is unread and in his inbox
If it is in your sentbox - it was read
If it is not there, it was lost

-methods

[migueralliart]

Could ya respond to my PM?

Check your outbox - some times the server gets reset and things disappear.

If it is in your outbox - it is unread and in his inbox
If it is in your sentbox - it was read
If it is not there, it was lost

-methods

Good to know!

and free bump btw

[sangesf]

Sent another PM so it's sitting in the outbox (unread)...
Apparently he lives near me as he's seen my test-bed bike "The Beast", at Starbucks near my house..

P.S. Another free bump.. LOL

[migueralliart]

Just a sample discharge graph of these puppies without the bms and a 3S harness attached.

discharge ~7amps

[sangesf]

Sent the email, with THREE pics..

[migueralliart]

Got these ready to go as well 24 cells..

[migueralliart]

To the top!!!

BUMP!

[inkeeper77]

I received my cells quickly after ordering- I got 17 packs. (51 individual cells) - I am only starting my build, but I am happy! They are genuine cells. A bit messy as expected, since they are already in packs and I had to break them apart, but they look like they will work great!

[migueralliart]

I received my cells quickly after ordering- I got 17 packs. (51 individual cells) - I am only starting my build, but I am happy! They are genuine cells. A bit messy, since they are already in packs and I had tro break them apart, but they look like they will work great!

Thanks for that keep me informed maybe you can post some pics of your build later...

[migueralliart]

UPDATE,

Now have 100 more packs to sell. These have been cycled 2-3 times to ensure they meet capacity and that you will receive no funky cells. At the moment shipping ground only and free to the US.

For more info read the first post of the thread.

[biohazardman]

Received my 20 packs today well packaged as pictured earlier in this post. Like others I will have to tear them apart as the 9A discharge they are set up for is less than half what I need from them and I don't want to carry twice the batts required around with me all the time. Still this is exactly as expected and as advertised.

[migueralliart]

Some examples of what you can do with these packs....

5S2P Booster Pack will cost you ~ 65$ shipped plus a balance connector and some andersons and an enclosure. This is a great way to get some more top speed for a certain distance. Pack built with spare cells I had laying around so they were not the cleanest in the exterior but then again they deliver a lot of amps and still deliver the new capacity.

BTW if you cut tabs connecting them but still leave a small part spot welded to it you can solder directly into it. It is quite easy I might add. Just be sure not to leave the iron touching the cell too much time as you might damage it..


viewtopic.php?f=2&t=35301&p=538995#p538995

[migueralliart]

Current stock ready to ship as always cycled before shipping it.

[migueralliart]

BUMP!

[migueralliart]

bump

[migueralliart]

Bump!

[migueralliart]

Bump!

[migueralliart]

BUMP! FTMFW

[migueralliart]

BuMp!

[migueralliart]

Just posted a price drop for people buying more than 12 cells.

I'll give them to you @ 6$ shipped in the US

[TonyReynolds]

I would like to order some of these for my eBike lighting, which is currently slated to be a single 25W 12VDC H3 halogen driving light.

I figure if I run 4S3P (12 cells), that will get me 13.2 nominal with 6.9 Ah, about 91 Wh. At 80% DOD, that would get me about 2.9 hours of runtime for the headlamp.

A couple things have me stuck, as I'm I'm not a EE and I don't play one on TV:

1. What would I need for a charger and,
2. Would I need a BMS if I'm just running lighting, which is a steady current draw?

I could also do 16S1P (just 4 more cells) with a step-down dc-to-dc convertor to 12-14VDC, but I don't know whether that would get me any more runtime for the light, but it *would* give me extra Ah's as a "reserve" for my 52V 16S5P tringle battery if I used Andersons. I could simply unplug my main pack if I were to hit LVC on a ride and get a little more distance...

Thoughts?

[teklektik]

I figure if I run 4S3P (12 cells), that will get me 13.2 nominal with 6.9 Ah, about 91 Wh. At 80% DOD, that would get me about 2.9 hours of runtime for the headlamp.

1. What would I need for a charger and,
2. Would I need a BMS if I'm just running lighting, which is a steady current draw?

Get a power strip and plug in four VoltPhreaks single cell chargers, skipping a socket in between for cooling. Make up a little connector for all four and you have a quickie balance charger - no BMS required, nothing needs to be disconnected. However, at only 2A charge current, your 3p pack will take about 3 hours to charge.

Importantly, even though it looks like there are common (+),(-) wires going to the same terminals in your pack from adjacent chargers, you really need to run separate wires right up to the cell terminals so each charger will not see voltages related to charging going on for its neighbors i.e. 8 pin connector, not 5.