Just doena trade, this for a broken workshop compressor motor and tank
Seems to work, just put 24 volt of mixed scrap cells together with crocodile clips, bit of twisted wire etc and powered it up. Not enough volts or amps to make it go with any weigh on it, but the wheel turns and throttle works
Had the controller apart..and it has a 24 volt relay, and two shunts..so maybe a bit of shunt soldering may be possible.
But no idea what the FETS are..the front of them is hidden behind the relay and the caps...50V caps, but the 234 volt relay must limited the voltage to 24 volt or so right? can't think that I can take it up to 36 volt.
Brushed DC motor and controller, with two pots..any idea what they may adjust? current? LVC?
But any one else have any info? a name?
Mongoose frame, Fox F100 forks,26x2.3 tyres
100V 20Ah LiPo
Lyen 18 FET 65 Amp,5304 in 26 inch Mavic rim
To illustrate the vain conceit that the universe must be somehow pre-ordained for us, because we are so well-suited to live in it, he mimed a wonderfully funny imitation of a puddle of water, fitting itself snugly into a depression in the ground, the depression uncannily being exactly the same shape as the puddle."
-- Richard Dawkins, in "Lament for Douglas" (14 May 2001)