S12S Sine Wave Controller

Get real world experience and user feedback on the electric bicycle products.
Post Reply
User avatar
docnjoj
100 GW
100 GW
Posts: 5818
Joined: Sep 29, 2007 5:26 pm
Location: Fairhope AL

S12S Sine Wave Controller

Post by docnjoj » Jan 06, 2014 1:05 pm

Well my test was very short. I hooked it up with Halls and Phase and checked current flow. It was less than 1 amp but had some hiccups at full throttle. I should have tried several more combinations! Took it out on the road and it ran funny. It was slow and applied the electric brake(regen) often. Then it just stopped working. I probably blew FETs but it looks OK inside. I'll probably send it to dnmun or zombiess to analyse.
I believe I had incorrect Hall/Phase combo so I ordered another one (they are reasonably priced at 34 bucks). I hate giving up and want to use the Pedelec features on my trike. I'll have another go when the new one arrives but will be MUCH more careful matching wires then. Hopefully it was my fault and not a manufacturing defect. We shall see. I also ordered a SO9P just incase of failure. It avoids the Sine Wave and uses square wave but has the proportional power for pedaling
My 9 year old Infineon doesn't have all the bells and whistles but it just keeps on ticking and runs the trike.
otherDoc
E-bike stable at our house

Steintrike Mad Max full suspension trike rear Cute 100H going on: Whoops, Cute wheel broke but I fixed it.
Sun USX delta trike EbikeKit small geared front wheel sort of front suspension for wife

Agniusm/A123 AMP 20 36 volts on the Steini has been taken off.
2x16000 Multisport from HK now gone as they died after 2 years
New Luna 10S bottle battery 13.6AH now on mine
Relatively New 10S4Px2 for wife's bike giving 20ah @ 40 volts home made Panasonic from Tumich. BMS's rule.

User avatar
docnjoj
100 GW
100 GW
Posts: 5818
Joined: Sep 29, 2007 5:26 pm
Location: Fairhope AL

Re: S12S Sine Wave Controller

Post by docnjoj » Jan 10, 2014 2:46 pm

I ordered a new S12S and will take my time and use the standard methods for finding Halls and Phase connections. I also ordered an S09P for backup. Both controllers can do Pedelec and my present old Infineon may not be able to. Stay tuned.
otherDoc
E-bike stable at our house

Steintrike Mad Max full suspension trike rear Cute 100H going on: Whoops, Cute wheel broke but I fixed it.
Sun USX delta trike EbikeKit small geared front wheel sort of front suspension for wife

Agniusm/A123 AMP 20 36 volts on the Steini has been taken off.
2x16000 Multisport from HK now gone as they died after 2 years
New Luna 10S bottle battery 13.6AH now on mine
Relatively New 10S4Px2 for wife's bike giving 20ah @ 40 volts home made Panasonic from Tumich. BMS's rule.

User avatar
friendly1uk
10 MW
10 MW
Posts: 2440
Joined: Mar 14, 2013 1:18 pm
Location: The not so UK

Re: S12S Sine Wave Controller

Post by friendly1uk » Jan 10, 2014 6:48 pm

Damn. Either I keep reading this thread or it's a common theme. I presume you matched the colours, which is about all I'm likely to do. Did it last long?
bmsbattery sent me broken and incorrect stuff, and won't even talk to me about it.

User avatar
docnjoj
100 GW
100 GW
Posts: 5818
Joined: Sep 29, 2007 5:26 pm
Location: Fairhope AL

Re: S12S Sine Wave Controller

Post by docnjoj » Jan 13, 2014 4:19 pm

Well my Infineon has b-b, g-y, y-g so I started with that. I checked the current and it was about 1 amp but twitched at higher Rpm. Road tested and terrible. Didn't shut it off fast enough :oops:
Time for a new one.
This one I will actually test with the spreadsheet. Been years since I tried a new controller.
otherDoc
E-bike stable at our house

Steintrike Mad Max full suspension trike rear Cute 100H going on: Whoops, Cute wheel broke but I fixed it.
Sun USX delta trike EbikeKit small geared front wheel sort of front suspension for wife

Agniusm/A123 AMP 20 36 volts on the Steini has been taken off.
2x16000 Multisport from HK now gone as they died after 2 years
New Luna 10S bottle battery 13.6AH now on mine
Relatively New 10S4Px2 for wife's bike giving 20ah @ 40 volts home made Panasonic from Tumich. BMS's rule.

User avatar
docnjoj
100 GW
100 GW
Posts: 5818
Joined: Sep 29, 2007 5:26 pm
Location: Fairhope AL

Re: S12S Sine Wave Controller

Post by docnjoj » Jan 22, 2014 12:05 pm

Got the new one and after fussing with the meter made it work. The old one may also work, since the controller is controlled in one aspect by the LCD meter. You need to go to Advanced Settings and set P2 to 1 (I think) Then the motor responds to the throttle. In my case very slowly. Still testing.
otherDoc

Edit: Got it to run faster somehow? Road test today.
E-bike stable at our house

Steintrike Mad Max full suspension trike rear Cute 100H going on: Whoops, Cute wheel broke but I fixed it.
Sun USX delta trike EbikeKit small geared front wheel sort of front suspension for wife

Agniusm/A123 AMP 20 36 volts on the Steini has been taken off.
2x16000 Multisport from HK now gone as they died after 2 years
New Luna 10S bottle battery 13.6AH now on mine
Relatively New 10S4Px2 for wife's bike giving 20ah @ 40 volts home made Panasonic from Tumich. BMS's rule.

patpatbut
10 W
10 W
Posts: 66
Joined: Jul 15, 2013 5:39 am
Location: UK, Oxford

Re: S12S Sine Wave Controller

Post by patpatbut » Feb 02, 2014 5:29 am

Any update for the test run?

Pat

User avatar
amberwolf
100 GW
100 GW
Posts: 24259
Joined: Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: S12S Sine Wave Controller

Post by amberwolf » Feb 02, 2014 1:29 pm

For some reason he has two threads on this (would be better if they were merged into one ;)). This is the other:
https://endless-sphere.com/forums/vi ... 81#p849681

User avatar
docnjoj
100 GW
100 GW
Posts: 5818
Joined: Sep 29, 2007 5:26 pm
Location: Fairhope AL

Re: S12S Sine Wave Controller

Post by docnjoj » Feb 25, 2014 5:14 pm

Sorry AW. I certainly would welcome combine threads if you mean me.
Update:
S12S has been going well for about 2 weeks with no problems or cutouts, since I connected the Speed Magnet and sensor. Now that it is trouble free (except for the big stick I rode over that knocked off the sensor! Now fixed.)I have really been enjoying the absolute silence that the 9C clone runs at. Also the torque response is gradual but firm and smooth. I had to repair the meter to fit on my front derailleur mount, but it works fine and is fun having a fairly accurate speedometer. We average around 14 mph so no speed demons. I can now recommend the BMS S12S Sine Wave controller at 36 volts.
otherDoc
E-bike stable at our house

Steintrike Mad Max full suspension trike rear Cute 100H going on: Whoops, Cute wheel broke but I fixed it.
Sun USX delta trike EbikeKit small geared front wheel sort of front suspension for wife

Agniusm/A123 AMP 20 36 volts on the Steini has been taken off.
2x16000 Multisport from HK now gone as they died after 2 years
New Luna 10S bottle battery 13.6AH now on mine
Relatively New 10S4Px2 for wife's bike giving 20ah @ 40 volts home made Panasonic from Tumich. BMS's rule.

User avatar
TheBeastie
1 MW
1 MW
Posts: 1647
Joined: Jul 28, 2012 12:31 am
Location: Melbourne Australia

Re: S12S Sine Wave Controller

Post by TheBeastie » Jun 12, 2015 2:20 am

I bought the latest S12S controller from bmsb a good month ago, I just put it on last night and I was surprised to see the S12S has grown from the last S12S I bought from bmsb which I got when they first came out.
Look at the size difference. Dont be fooled by the fact I painted my old one black and put a sticker on it, its still very much the S12S.
0115b4884e5862af51a11259b2db061036905bc94d.jpg
Also I tried to change over to this "dual hall" PAS sensor it fits great like a glove but I simply couldn't actually get it to work, I placed back on my old disc style PAS which worked instantly. I got 3 of the "dual hall" sensors cos they were so cheap but none work for me.
IMG_13682.jpg
"dual hall" PAS sensor
IMG_13682.jpg (157.84 KiB) Viewed 302 times
Also upgraded to the KT-LCD3 display, what I love about this display is it has a little symbol that shows up when ever the brake sensors are engaged, its symbol is next to the Light symbol.
By FAR the most frequent problem I have had has been when the ebrake sensors have been artificially engaged and thus the motor is cutout/dead but I would normally have no idea why before I had this LCD display and it would take a while to work out that was the only problem.
IMAG0002.jpg
KT-LCD3
IMAG0002.jpg (133.97 KiB) Viewed 302 times
Speed Kills Range, 10mph = 46 miles range, 20mph = 20 miles, 30mph = 8 miles range http://goo.gl/1JNL53
Over Charging Kills ur battery bit.ly/1hzWKl4
Beware of dodgy 18650 cells! youtu.be/eOshOXcSkDA
Consider PAS as your only throttle http://goo.gl/m17J9j
CO2 is core to Photosynthesis https://youtu.be/t5mvDONB6FI
Check out the Bill Gates nuclear reactor https://goo.gl/Rtky9q
10 Square Miles of solar panels = 0.12GW average power! https://goo.gl/Ub1S39

Avitt
1 kW
1 kW
Posts: 391
Joined: Jan 02, 2014 3:28 pm
Location: Orange County, CA

Re: S12S Sine Wave Controller

Post by Avitt » Jun 12, 2015 12:00 pm

TheBeastie wrote:I bought the latest S12S controller from bmsb a good month ago, I just put it on last night and I was surprised to see the S12S has grown from the last S12S I bought from bmsb which I got when they first came out.
Look at the size difference. Dont be fooled by the fact I painted my old one black and put a sticker on it, its still very much the S12S.
Yeah, it seems that when then introduced the S12SH model, which was in the larger box, they just decided to use the same box for all S12S models.

I found the same thing, when I ordered a new S12S last year. (The old one wasn't compatible with the LCD3.) The larger box was too big for the space allocated on my bike. But I found it fairly easy to change the guts of the controller, and use the old box with the new electronics.

Avitt
1 kW
1 kW
Posts: 391
Joined: Jan 02, 2014 3:28 pm
Location: Orange County, CA

Re: S12S Sine Wave Controller

Post by Avitt » Jun 12, 2015 12:13 pm

Oh, and if you want to paint the new box black as well, here's a tip:

Disassemble the box, clean the parts thoroughly, and use a couple of coats of Rustoleum Appliance Epoxy:

http://www.amazon.com/Rust-Oleum-788683 ... ance+black

Hang the parts on wires from your oven racks, and bake them at low heat for 2-3 hours.

I painted mine about 8 months ago, and it's been holding up perfectly - no chips or fading:

Image

User avatar
TheBeastie
1 MW
1 MW
Posts: 1647
Joined: Jul 28, 2012 12:31 am
Location: Melbourne Australia

Re: S12S Sine Wave Controller

Post by TheBeastie » Jun 14, 2015 2:16 pm

Avitt wrote:Oh, and if you want to paint the new box black as well, here's a tip:

Disassemble the box, clean the parts thoroughly, and use a couple of coats of Rustoleum Appliance Epoxy:

http://www.amazon.com/Rust-Oleum-788683 ... ance+black

Hang the parts on wires from your oven racks, and bake them at low heat for 2-3 hours.

I painted mine about 8 months ago, and it's been holding up perfectly - no chips or fading:
That looks tiptop, yeah I bought probably the cheapest black paint I could buy, didn't think about quality and yeah its chipped to hell.
Will try and get that paint next time, cheers.
Last edited by TheBeastie on Sep 05, 2017 2:26 am, edited 1 time in total.

User avatar
TheBeastie
1 MW
1 MW
Posts: 1647
Joined: Jul 28, 2012 12:31 am
Location: Melbourne Australia

Re: S12S Sine Wave Controller

Post by TheBeastie » Sep 05, 2017 2:26 am

Anyone know whats the highest voltage battery someone has used on the S12S LCD3 setup?
I am guessing the caps are 63V so I am guessing 14S 18650 is probably the highest voltage I could safely have without having to worry?

timmy66
100 mW
100 mW
Posts: 35
Joined: Jul 12, 2016 1:07 am

Re: S12S Sine Wave Controller

Post by timmy66 » Nov 03, 2017 1:07 pm

Curious if there's a source for these with less expensive shipping ($35 to USA). Shipping is same price as controller!!

I'm interested in buying one to experiment with casainho's open source firmware.

Any followups (bad) news from those that have been using this for a few years now?

Thanks.

User avatar
motomech
100 MW
100 MW
Posts: 2910
Joined: Sep 11, 2010 12:21 am
Location: Tucson Az.

Re: S12S Sine Wave Controller

Post by motomech » Nov 03, 2017 5:52 pm

That particular controller is propriatary to BMS Battery.
Motomech

'03 Rocky Mountain Edge 2WD 260 Q100H frt and Ezee V1 rear 2 Elifebike 20A & 25A 9-FET controllers 12S/20Ah Multistar Lipo rear 5Ah Turnigy frt Luna Cyclops Extra lite Alex 24DM rims, 2.4 Holly Rollers run ghetto tubeless. 25 mph. Mean Well HLG-320H-48A
https://endless-sphere.com/forums/viewt ... =3&t=83430
'07 GT Idive 4 4.0, Q100C 201 12S LiPoly elifebike 9-FET 17A controller. 20 MPH.
https://endless-sphere.com/forums/viewt ... 8#p1237928

Post Reply