bigmoose
1 MW
Alan B created this thread http://endless-sphere.com/forums/viewtopic.php?f=14&t=22378 to design more reliable Cell Monitoring Electronics. I recommended that we gather failure mode data so that he can be sure to design out the known failure modes. Jeremy added a good bit of meat to the bones with a recommendation of doing a BMS FMECA.
So with Alan's recommendation, I am starting this thread to vote for the failure modes that you have seen in BMS's and if I do not have them listed, add a post and I will try to edit the poll. Feel free to comment in posts.
The intent is to get a statistical picture from experience on what has failed in BMS's in the field.
For the poll to be valid, please only vote for items that you have directly experienced.
So with Alan's recommendation, I am starting this thread to vote for the failure modes that you have seen in BMS's and if I do not have them listed, add a post and I will try to edit the poll. Feel free to comment in posts.
The intent is to get a statistical picture from experience on what has failed in BMS's in the field.
For the poll to be valid, please only vote for items that you have directly experienced.