SURVEY: MXUS 3K setups

Get the forum community involved in polls and surveys.
Post Reply
korpin
10 kW
10 kW
Posts: 561
Joined: Sep 18, 2011 5:50 pm

Re: SURVEY: MXUS 3K setups

Post by korpin » Jul 27, 2015 11:42 am

my build is going to be:

5T
110 VOLTS
45 MAX AMPS
80 PHASE AMPS
REVOLUTION FRAME WITH MXUS LACED TO 19" MOTOCYCLE RIM (25+" WITH TIRE)
COMBINED WEIGHT ABOUT 280 POUNDS

User avatar
Grizzl-E
100 W
100 W
Posts: 201
Joined: Jun 01, 2015 9:57 pm
Location: Manitoba, Canada

Re: SURVEY: MXUS 3K setups

Post by Grizzl-E » Aug 25, 2015 2:11 pm

Build thread here: https://endless-sphere.com/forums/viewt ... 8#p1088272

6t

18s lipo right now

29-30" diameter fat tire

45kph max loaded speed with no field weakening
65kph with max field weakening

96a max phase current foc right now is not enough

Bike plus rider ~260lbs

Going to 20s 18650 and 200a max phase current foc shortly. I need my wheelies :)
Only brutal acceleration will do.

User avatar
Doctorbass
100 GW
100 GW
Posts: 8154
Joined: Apr 08, 2007 2:24 am
Location: Quebec, Canada East
Contact:

Re: SURVEY: MXUS 3K setups

Post by Doctorbass » Aug 25, 2015 2:52 pm

Dual motor and dual Max-E

Motor wind: (3T)
Wheel size: (rim/wheel diameter)24" wheel
Voltage: 22s lipo
Battery current: 400 each controller


Not finished yet, to be tested in the next week
CURRENT PROJECT: 2WD duo MXUS/Max-E ebike 32kW
https://endless-sphere.com/forums/viewto ... =3&t=65764
-Fastest speed record 117 km/h on flat
-Fastest 1/4 mile@ 114km/h on flat and 16.316 sec
-Succeded to haul a 19200 pounds schoolbus!
113kmh Gianthttp://www.evalbum.com/3406
Mongoosehttp://www.evalbum.com/1947
YOUTUBE---https://m.youtube.com/user/Doctorbasss
http://twitter.com/DocbassMelancon
I speak FRENCH and english

User avatar
teslanv
100 MW
100 MW
Posts: 2813
Joined: Nov 03, 2013 8:42 pm
Location: Bellevue, WA - USA
Contact:

Re: SURVEY: MXUS 3K setups

Post by teslanv » Sep 02, 2015 7:44 am

MXUS 3T in a 17" Moto rim with 21.5" O.D. tires.
Infineon 18FETx4110 controller
24S LiPo (98v max charge)
80A battery, 180A phase.
1/4-mile drag run:

I build custom ebikes.
http://www.westcoastelectrics.com
West Coast Electric Cycles
Bellevue, WA
USA

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: SURVEY: MXUS 3K setups

Post by madin88 » Sep 02, 2015 12:25 pm

setup one:

4T with 4mm² phase wires and custom drilled paired spoke holes, laced in 24" Alex DX32 rim with 2,5" hookworms
Max-E, set to 70A/120A in normal mode and 120/220A in boost
2kWh 22s11p 25R battery

setup two:

3T with 8mm² phase wires and custom axle, improved heat emission, laced into 17" moped rim with 2,5" Sava MC11
Max-E maxed out :)
2kWh 20s12p 25R battery
- Votec V-FR frame / MXUS 3T / 17" Mitas MC11 / Adaptto Max-E / 20s12p 25R -> approved as L1e moped and fully road legal in EU :)
- Vector white / MXUS 4T / 24" Hookworms / Adaptto Max-E / 22s11p 25R
- KTM Hardtail Pedelec / eZee V2 6T / 27,5" / Kelly KBSX @ 1,5kW / Torque PAS / CA-V3 / 13s4p Sanyo GA in Shark case

User avatar
teslanv
100 MW
100 MW
Posts: 2813
Joined: Nov 03, 2013 8:42 pm
Location: Bellevue, WA - USA
Contact:

Re: SURVEY: MXUS 3K setups

Post by teslanv » Sep 02, 2015 9:30 pm

madin88 wrote:
3T with 8mm² phase wires and custom axle, improved heat emission, laced into 17" moped rim with 2,5" Sava MC11
Max-E maxed out :)
2kWh 20s12p 25R battery
What kind of top speeds are you getting with that set-up?!?!
I build custom ebikes.
http://www.westcoastelectrics.com
West Coast Electric Cycles
Bellevue, WA
USA

User avatar
madin88
10 MW
10 MW
Posts: 2328
Joined: May 27, 2013 2:02 am
Location: Austria

Re: SURVEY: MXUS 3K setups

Post by madin88 » Sep 03, 2015 6:21 am

teslanv wrote: What kind of top speeds are you getting with that set-up?!?!
honestly i have not tried it out. at the moment i'm away sick at home because i have broken my collar bone :(
I'll keep you posted
- Votec V-FR frame / MXUS 3T / 17" Mitas MC11 / Adaptto Max-E / 20s12p 25R -> approved as L1e moped and fully road legal in EU :)
- Vector white / MXUS 4T / 24" Hookworms / Adaptto Max-E / 22s11p 25R
- KTM Hardtail Pedelec / eZee V2 6T / 27,5" / Kelly KBSX @ 1,5kW / Torque PAS / CA-V3 / 13s4p Sanyo GA in Shark case

User avatar
Doctorbass
100 GW
100 GW
Posts: 8154
Joined: Apr 08, 2007 2:24 am
Location: Quebec, Canada East
Contact:

Re: SURVEY: MXUS 3K setups

Post by Doctorbass » Sep 03, 2015 8:20 am

madin88 wrote:
teslanv wrote: What kind of top speeds are you getting with that set-up?!?!
honestly i have not tried it out. at the moment i'm away sick at home because i have broken my collar bone :(
I'll keep you posted

Ouch, I wish you you recover quickly !

Doc
CURRENT PROJECT: 2WD duo MXUS/Max-E ebike 32kW
https://endless-sphere.com/forums/viewto ... =3&t=65764
-Fastest speed record 117 km/h on flat
-Fastest 1/4 mile@ 114km/h on flat and 16.316 sec
-Succeded to haul a 19200 pounds schoolbus!
113kmh Gianthttp://www.evalbum.com/3406
Mongoosehttp://www.evalbum.com/1947
YOUTUBE---https://m.youtube.com/user/Doctorbasss
http://twitter.com/DocbassMelancon
I speak FRENCH and english

markz
10 GW
10 GW
Posts: 4737
Joined: Jan 09, 2014 11:38 pm
Location: Alberta Canada

Re: SURVEY: MXUS 3K setups

Post by markz » Sep 03, 2015 2:35 pm

4T Version 2 with 18fet lyen, CA V3-DP, and a 26" 31mm Wide Downhill Crysatlyte Rim
12 and 10awg PTFE Teflon phase upgrade from http://www.apexjr.com/index.html
Might paint the inside with some sort of fancy dielectric or something else.
Will change to a 19" moto rim that gets me 24" diameter wheel.
At default 45A I was getting ~60kph, keeping up with traffic on 60km/h road.
Unibond: 6-1/4 in. LED Spot/Flood Light
A123 ANR26650M1A batteries
High discharge 18650 batteries

Post Reply