Marin Wild Cat Trail

Show off your E-bike creation here.
Post Reply
goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Marin Wild Cat Trail

Post by goatman » Jan 03 2020 4:01pm

the build is
crystallite hs3540r
phaserunner
ca 2.3
13s5p- lg mh1 cells
im switching the rear tire to a duro razorback 24x3.0

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 03 2020 4:02pm

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 03 2020 4:03pm

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 03 2020 4:03pm

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 03 2020 4:09pm

I needed to test the hanging battery before putting it on my sons bike so I put this together, 13s5p is 65 cells so you could actually do a 16s4p battery in that case with higher amp cells. ill keep adding pics as I build this bike with a different battery and clean up the wiring

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 6:58pm

cutting axle to fit torque
Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 6:59pm

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 7:03pm

theres actually 2 torque arms, one on each side of the motor mounted the same way. ill be making torque plates but I needed these on for testing the bike.

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 7:08pm

went for a ride, tried not to go over 2000 watts because the battery is fused at 40 amps. im actually surprised how the bike did at 48v and 2000 watts. ca is km/h

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 7:09pm

I left with 54.3v and this was after a quick trip

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 7:09pm

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 7:11pm

Image

battery is 16ah

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 04 2020 7:23pm

8volt battery sag, lg mh1 aren't made for this kind of bike. this battery is going to be used with a little 500 watt geared hub. I have 25r packs that I share between my bikes. ill post more later. a 26 inch hookworm on the front and this could be a fun city bike

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 06 2020 11:59pm

added 3s4p to a 14s4p for 17s4p of 25r. need to get a bms for it. made a basic mold for a fiberglass shell with a 3/16 aluminum plate. just waiting for the rain to stop.
Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 12 2020 1:12pm

ive been fitting the battery case to the bike, now I just need to finish shaping and sanding and paint

Image

Image

Image

Image

goatman   100 W

100 W
Posts: 282
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: Marin Wild Cat Trail

Post by goatman » Jan 14 2020 3:57pm

didn't want wires running up the side of the battery, I had room for 18s so I used cell holders and filled the cavity with silicone to act as a bumper. most of the battery weight will be there.

Image

Image

I loaded up the silicone and will trim it later

Image

Image

just need to make some kind of cap/nose for the battery case.

Post Reply