Your Creation's Before & After Pics

Show off your E-bike creation here.
User avatar
eCue
1 kW
1 kW
Posts: 487
Joined: Nov 03, 2017 5:14 pm
Location: Vancouver Island , Canada

Re: Your Creation's Before & After Pics

Post by eCue » Dec 06, 2017 10:16 am

Would be a great friction drive bike ..
Solar charge station on wheels join the Revolution

Robert62
1 µW
1 µW
Posts: 2
Joined: Dec 05, 2017 8:44 pm

Re: Your Creation's Before & After Pics

Post by Robert62 » Dec 06, 2017 9:35 pm

SlowCo wrote:
Dec 06, 2017 9:04 am
:lol: 8)

Please also make a wide front fork and insert the same wheel in there as is in the rear and then mount a Cyclone 3000W middrive to the chain drive!
Funny you should mention that. I had the same thought....
Robert

SlowCo
10 kW
10 kW
Posts: 716
Joined: Jan 05, 2015 5:43 pm
Location: The Netherlands

Re: Your Creation's Before & After Pics

Post by SlowCo » Dec 07, 2017 5:40 am

Go for it!
I'm subscribed to this thread so will hopefully see that result in the near future. Or start a built thread for it on E-S and leave a link to it here. :)

electronicru
1 µW
1 µW
Posts: 2
Joined: Nov 19, 2017 4:31 am

Re: Your Creation's Before & After Pics

Post by electronicru » Dec 08, 2017 8:47 am

left (before), right (after)
it was ... 1500W speed 45 km/h
has become ... 8000W speed 70km/h
Attachments
before and after_.jpg

SlowCo
10 kW
10 kW
Posts: 716
Joined: Jan 05, 2015 5:43 pm
Location: The Netherlands

Re: Your Creation's Before & After Pics

Post by SlowCo » Dec 09, 2017 6:23 pm

electronicru wrote: left (before), right (after)
it was ... 1500W speed 45 km/h
has become ... 8000W speed 70km/h
Very nice! 8)
Please tell us more: Which motor, controller, battery etc?

electronicru
1 µW
1 µW
Posts: 2
Joined: Nov 19, 2017 4:31 am

Re: Your Creation's Before & After Pics

Post by electronicru » Dec 10, 2017 1:02 pm

stock motor + “chupasos” :D (forced air cooling)
https://youtu.be/-ee1mJnZ71k
Battery
https://youtu.be/pjHiYKFRZ-o
Stock Controller. Upgrade mosfets, capacitors + forced air cooling + arduino

SlowCo
10 kW
10 kW
Posts: 716
Joined: Jan 05, 2015 5:43 pm
Location: The Netherlands

Re: Your Creation's Before & After Pics

Post by SlowCo » Dec 10, 2017 1:48 pm

Very good result!

User avatar
eCue
1 kW
1 kW
Posts: 487
Joined: Nov 03, 2017 5:14 pm
Location: Vancouver Island , Canada

Re: Your Creation's Before & After Pics

Post by eCue » Dec 10, 2017 3:54 pm

Friction drive ?

Image

All the comforts of a car without the comfort !
Solar charge station on wheels join the Revolution

Buk___
10 kW
10 kW
Posts: 722
Joined: Jul 28, 2017 5:59 pm

Re: Your Creation's Before & After Pics

Post by Buk___ » Dec 10, 2017 4:43 pm

eCue wrote:
Dec 10, 2017 3:54 pm
Friction drive ?
Does it rub you the wrong way :)

User avatar
eCue
1 kW
1 kW
Posts: 487
Joined: Nov 03, 2017 5:14 pm
Location: Vancouver Island , Canada

Re: Your Creation's Before & After Pics

Post by eCue » Dec 11, 2017 12:25 pm

The aero is kinda of upsetting :D but the sunroof makes up for it notice the spoiler :D now if it only had a nose cone ! .. :pancake:
Solar charge station on wheels join the Revolution

webpablo
1 µW
1 µW
Posts: 2
Joined: Dec 11, 2017 4:32 pm

Re: Your Creation's Before & After Pics

Post by webpablo » Dec 11, 2017 4:59 pm

I wanted a commuter that would handle my 6 mile commute in Seattle. This is what I landed on…
Before was a brand new Raleigh Clubman Steel Framed Disc brake Road Bike.
raleigh-clubman-277677-1.jpg
raleigh-clubman-277677-1.jpg (83.01 KiB) Viewed 1830 times
After: Bafang BBS02 install
IMG_0096.jpg
The install shop (alki Bike and Board in Seattle, WA) setup a nice little bar end for throttle + controller
I wired in a SuperNova E3 headlight and taillight(not pictured) wired directly to the BBS02's headlight connector.
IMG_0097.jpg
Since I didn't want to give up a brake cut off or my STI shifters, I ordered these and had the shop install them. The used a U-brake noodle to make the angle work on the rear disc brake.
https://em3ev.com/shop/hwbs-ebrake-sensor/
IMG_0098.jpg

User avatar
motomech
1 GW
1 GW
Posts: 3036
Joined: Sep 11, 2010 12:21 am
Location: Tucson Az.

Re: Your Creation's Before & After Pics

Post by motomech » Dec 11, 2017 6:24 pm

electronicru wrote:
Dec 10, 2017 1:02 pm
stock motor + “chupasos” :D (forced air cooling)
https://youtu.be/-ee1mJnZ71k
Battery
https://youtu.be/pjHiYKFRZ-o
Stock Controller. Upgrade mosfets, capacitors + forced air cooling + arduino
“chupasos” = Suckers :D
Motomech

'03 Rocky Mountain Edge 2WD 260 Q100H frt and Ezee V1 rear 2 Elifebike 20A & 25A 9-FET controllers 12S/20Ah Multistar Lipo rear 5Ah Turnigy frt Luna Cyclops Extra lite Alex 24DM rims, Crazy Bobs run ghetto tubeless. 25 mph. Mean Well HLG-320H-54A
https://endless-sphere.com/forums/viewt ... =3&t=83430
'07 GT Idive 4 4.0, Q100C 201 14S LiPoly elifebike 9-FET 20A controller. 23 MPH.
https://endless-sphere.com/forums/viewt ... 8#p1237928

imagineaudio
1 mW
1 mW
Posts: 11
Joined: Aug 04, 2016 4:16 pm
Location: Los Angeles, CA

Re: Your Creation's Before & After Pics

Post by imagineaudio » Dec 14, 2017 9:03 pm

webpablo wrote:
Dec 11, 2017 4:59 pm
I wanted a commuter that would handle my 6 mile commute in Seattle. This is what I landed on…
Before was a brand new Raleigh Clubman Steel Framed Disc brake Road Bike.
raleigh-clubman-277677-1.jpg

After: Bafang BBS02 install
IMG_0096.jpg

The install shop (alki Bike and Board in Seattle, WA) setup a nice little bar end for throttle + controller
I wired in a SuperNova E3 headlight and taillight(not pictured) wired directly to the BBS02's headlight connector.
IMG_0097.jpg

Since I didn't want to give up a brake cut off or my STI shifters, I ordered these and had the shop install them. The used a U-brake noodle to make the angle work on the rear disc brake.
https://em3ev.com/shop/hwbs-ebrake-sensor/
IMG_0098.jpg

How is that bag mounted to the frame?

bmrcfreak
10 mW
10 mW
Posts: 21
Joined: Sep 11, 2014 11:33 pm
Location: USA

Re: Your Creation's Before & After Pics

Post by bmrcfreak » Dec 16, 2017 10:52 pm

BBS02 hauls wood nicely :mrgreen:
Attachments
20171215_142732-490x1008.jpg
20171215_142732-490x1008.jpg (218.25 KiB) Viewed 1665 times

User avatar
Chalo
100 GW
100 GW
Posts: 6657
Joined: Apr 29, 2009 11:29 pm
Location: Austin, Texas

Re: Your Creation's Before & After Pics

Post by Chalo » Dec 16, 2017 11:06 pm

webpablo wrote:
Dec 11, 2017 4:59 pm
The install shop (alki Bike and Board in Seattle, WA)
Yay! That used to be my neighborhood shop! Tell Stu "ahoy" for me. I think about him often, and how he gave so many young folks their first job (when the bike shop I work in can only really absorb black belt mechanics). Hats off.
This is to express my gratitude to Justin of Grin Technologies for his extraordinary measures to save this forum for the benefit of all.

Sinclair
1 µW
1 µW
Posts: 1
Joined: Dec 17, 2017 5:58 am
Location: Berlin
Contact:

Re: Your Creation's Before & After Pics

Post by Sinclair » Dec 17, 2017 11:54 am

Carver Drift 01 2014
IMG_2335.JPG
IMG_2335.JPG (112.42 KiB) Viewed 1635 times
Carver Drift 01 2014
Bafang BBS02 48V 750W
52V 14Ah shark pack
Display 750C
Lekkie 36T
Shimano SLX derailleur + shifter upgrade
KMC X10e chain upgrade

Shark pack does not fit in frame, carried in backpack. Overall super easy conversion.
Super stoked with it, rides superb!


IMG_3615.jpg
IMG_3615.jpg (169.66 KiB) Viewed 1635 times
IMG_4050.JPG
IMG_4050.JPG (136.35 KiB) Viewed 1635 times
IMG_3615.jpg
IMG_3615.jpg (169.66 KiB) Viewed 1635 times
Attachments
IMG_3330.JPG
IMG_3330.JPG (104.05 KiB) Viewed 1635 times
IMG_3353.JPG
IMG_3353.JPG (182.04 KiB) Viewed 1635 times

Sdmountain
1 µW
1 µW
Posts: 1
Joined: Dec 23, 2017 11:31 pm

Re: Your Creation's Before & After Pics

Post by Sdmountain » Dec 23, 2017 11:43 pm

Fuji Reveal Large Frame, 27.5” Wheels, Full Suspension, BBSHD Ludicrous, Luna Sharkpack 52V

Hardest part of the build was upfront leg work in what seems to be the 1 in 500 shot to find a FS frame with 27.5 wheels, straight downtube to avoid the “udder” and its lack of clearance. On top of that it squeezed the Sharkpack inside the triangle. I did have to rotate the shock to squeeze it for a little more all black “stealth”.

Coinciding with this, we also built a Fuji 29er, however Sharkpack has to go under the downtube due to geometry differences.

This is a blast to ride, only 2 savvy hikers have even noticed that it is possibly an electric bike!
A2D1E859-F30F-4363-86E4-E74ED77D2FA5.jpeg
Fuji Reveal
2071BEDF-B9AF-47AB-8E15-5EE6EE27BE98.jpeg
Full Suspension 52V BBSHD
2071BEDF-B9AF-47AB-8E15-5EE6EE27BE98.jpeg (234.38 KiB) Viewed 1477 times

User avatar
amberwolf
100 GW
100 GW
Posts: 25053
Joined: Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Your Creation's Before & After Pics

Post by amberwolf » Jan 09, 2018 12:21 am

I've done a little work on the SB Cruiser trike,
https://endless-sphere.com/forums/viewt ... 5#p1349263
neatening up the headlight (new mount), and finally replaced the "temporary" year-old tiller fix with a new tiller tube, so a few pics. Kirin was supervising. (and the first pic below was taken at the same time as the two below it; it looks darker due to the camera stepping down the brightness to compensate for the headlight and downlighting)

Image

Image

Image

Side view of the tiller stuff (last night before I got the headlight part done)
Image

and the old ziptied-on headlight and shade
Image

webpablo
1 µW
1 µW
Posts: 2
Joined: Dec 11, 2017 4:32 pm

Re: Your Creation's Before & After Pics

Post by webpablo » Jan 09, 2018 1:10 pm

imagineaudio wrote:
Dec 14, 2017 9:03 pm
webpablo wrote:
Dec 11, 2017 4:59 pm
I wanted a commuter that would handle my 6 mile commute in Seattle. This is what I landed on…
Before was a brand new Raleigh Clubman Steel Framed Disc brake Road Bike.
raleigh-clubman-277677-1.jpg

After: Bafang BBS02 install
IMG_0096.jpg

The install shop (alki Bike and Board in Seattle, WA) setup a nice little bar end for throttle + controller
I wired in a SuperNova E3 headlight and taillight(not pictured) wired directly to the BBS02's headlight connector.
IMG_0097.jpg

Since I didn't want to give up a brake cut off or my STI shifters, I ordered these and had the shop install them. The used a U-brake noodle to make the angle work on the rear disc brake.
https://em3ev.com/shop/hwbs-ebrake-sensor/
IMG_0098.jpg

How is that bag mounted to the frame?
I it mounted using a Salsa Carry anything cage: https://www.rei.com/product/117442/sals ... ith-straps

And the bag is the Salsa Carry anything bag: https://www.rei.com/product/117424/sals ... g-cage-bag

The battery the shop used with my Kit was pretty much a bare wrapped battery. So this the solution they use. I like it because it doesn't scream E-Bike. =D

User avatar
vlaca2
10 W
10 W
Posts: 96
Joined: Dec 19, 2014 12:10 pm
Location: Hungary

Re: Your Creation's Before & After Pics

Post by vlaca2 » Jan 10, 2018 9:36 am

Hi All!

My new middrive hardtrail:

Before:
IMG_1716-640.jpg
After:
IMG_2072-640.jpg
IMG_2072-640.jpg (206.31 KiB) Viewed 1136 times
Test videos:





Middrive hardtail e-bike build: https://endless-sphere.com/forums/viewt ... 28&t=91875
Scrub Psycho e-mtb build: viewtopic.php?f=35&t=66244
MBS Pro 12 e-mtb build: viewtopic.php?f=35&t=68710
Electric Drift Trike build: https://endless-sphere.com/forums/viewt ... 35&t=84936

Monkeypowah
1 mW
1 mW
Posts: 11
Joined: Nov 22, 2017 5:04 pm

Re: Your Creation's Before & After Pics

Post by Monkeypowah » Jan 23, 2018 2:32 pm

Originally started as a 2WD on a Giant frame, went and bought thru axle forks so working out how top get front hub connected...are there any adaptors out there.

Image

sannis
100 µW
100 µW
Posts: 8
Joined: Oct 11, 2016 12:17 pm

Re: Your Creation's Before & After Pics

Post by sannis » Jan 29, 2018 6:15 am

Monkeypowah wrote:
Jan 23, 2018 2:32 pm
Originally started as a 2WD on a Giant frame, went and bought thru axle forks so working out how top get front hub connected...are there any adaptors out there.

Image
What is this frame? How You put fat bike tyre in rear swingarm? Geared Bafang 750W?

Monkeypowah
1 mW
1 mW
Posts: 11
Joined: Nov 22, 2017 5:04 pm

Re: Your Creation's Before & After Pics

Post by Monkeypowah » Jan 30, 2018 3:58 pm

Its a cheap muddyfox turmoil...andcyes opened up the stays to fit fatbike hub..bafang 750W

User avatar
amberwolf
100 GW
100 GW
Posts: 25053
Joined: Aug 17, 2009 6:43 am
Location: Phoenix, AZ, USA, Earth, Sol, Local Bubble, Orion Arm, Milky Way, Local Group
Contact:

Re: Your Creation's Before & After Pics

Post by amberwolf » Feb 03, 2018 12:51 pm

Changed the thinly-padded "bench seat" out for a suspended-mesh "bleacher chair"; much more comfy. Also, a bit before that (same page in link below), built a mount for the Kia headlight, trimmed away all the excess ugly plastics, and added a weather-sealed cover so rain won't shatter the hot bulb. At the same time, rebuilt the tiller and front lighting mounts and replaced the headset.

https://endless-sphere.com/forums/viewt ... 1#p1355550

After:
Image

Image

Image


Before (with a couple of coolers for groceries on the cargo rack):

Image

Monkeypowah
1 mW
1 mW
Posts: 11
Joined: Nov 22, 2017 5:04 pm

Re: Your Creation's Before & After Pics

Post by Monkeypowah » Feb 06, 2018 3:38 pm

Thanks for the help on the thru axle front hub, after testing in the woods, that little Bafang at 30 amps really hauls, I was easily
climbing short ,steep paths through the trees that you could never pedal up in any gear.
It powered through soft sand, even on an incline with minimal help from me.
I could even..and I know you shouldn't...start mid hill on motor alone, very impressed

Post Reply