Mark's giant dh team build

[markt108]

So i sat down the other night and soldered up by balance tab parallel boards so i can parallel three of my packs then series connect each bank of three packs to get my 20s3p battery pack. they have an output connector which i will be using balance tab jumper leads to monitor the cell voltage with battery medic and eventually a bms.

here is a picture of what i have done.

[whereswally606]

Coincidentally I finished of my Lipo 18s2p case last weekend. here are my balance adapters. very adjacent.

vero balance boards with wires.jpg (85.46 KiB) Viewed 136 times

vero balance boards.jpg (149.15 KiB) Viewed 136 times

vero balance boards underside.jpg (120.97 KiB) Viewed 136 times

regards Andy