Scruffoid wrote:Looks really neat and tidy!
So what are your side covers made of and how do you get the attached etc.
Just interested for ideas for my next battery box.
Scruffoid wrote:Yeah i was more interested in the sides of the box only. Are they hinged on or bolted. are they two pieces or one big piece.
--- Ahh i just zoomed the pic way in i can see some screw or something there.
Tom L wrote:Your first bike looks very similar to what I've been planning for my Alias. A few of questions if you don't mind:
1) Is that a Mac motor?
2) Did you have any trouble with brake calliper clearance on either bike?
3) Did you use the 9 speed freewheels that came with both bikes? Any trouble fitting them (i.e. did you need a spacer washer and/or have to spread the dorpouts)?
4) How does the thuduster on the Alias hardtail ride? Tell me I don't need to buy a new bike as well...
Great build, thanks for sharing.
Ossielocal wrote:Finely finish ,thinking of using some hobbyking batteries down the track .
Should of brought a dual suspension bike ages ago the ride so smooth .
neptronix wrote:What are you doing for torque arms/plates?
Ossielocal wrote:Gday Tom ,
What bike do you own ?
Ossielocal wrote:Gday neptronix, didn't think it needed torque plates it's not overly torqueie Hub motor it's only 400w geared motor and it came with small torque washes and the axle fits pretty tight in the bike frame .neptronix wrote:What are you doing for torque arms/plates?
Ossielocal wrote:Had a problem today was going to go for a nice ride along the beach and the bike was playing up had to pull the motor apart and found a wire that was lose. Hopefully my soldering will hold and it's a know problem with these motors .viewtopic.php?f=3&t=36819
Duc998 wrote:Hi Ossielocal
How do you find pedeling power of your bike? I like pedelling around 20 kph without assistance on a flats but finding it hard on my new dh comp build, My first ebike was a cheap ebay full suspension setup and I'm sure I could pedal on flats easier then the DH Comp. Could be the extra weight or sprocket setup. So I'm already starting to think about a light Trance build with x3 8ah 6s lipos