Vector bike and frame owners.

Show off your E-bike creation here.
User avatar
miunchy
1 mW
1 mW
Posts: 15
Joined: Nov 24, 2016 1:28 pm
Location: Vilnius, Lithuania

Re: Vector bike and frame owners.

Post by miunchy » Aug 06, 2017 2:28 pm

madin88 wrote: Now i am using the stands from the chinese EEB frame which costs less than half (25USD vs 55USD the crap from vetcor), have felt like half the weight and so far they handle the weight well 8)
Madin, can you please place a link where i can buy this stand, thanks.
Vector 14kW midiE, Merida 1.5kW Magic Pie 4

Dumsterdave
100 W
100 W
Posts: 137
Joined: May 09, 2016 5:26 am
Location: copenhagen, Denmark

Re: Vector bike and frame owners.

Post by Dumsterdave » Aug 07, 2017 12:46 am

when is the new website up?

User avatar
madin88
10 MW
10 MW
Posts: 2330
Joined: May 27, 2013 2:02 am
Location: Austria

Re: Vector bike and frame owners.

Post by madin88 » Aug 07, 2017 11:05 am

miunchy wrote: Madin, can you please place a link where i can buy this stand, thanks.
https://endless-sphere.com/forums/viewt ... 9#p1284149

as mentioned in this topic i asked C&N ebike on Alibaba. it's not listed in theire assortment.

https://leilicn.en.alibaba.com/?spm=a27 ... 0.0.qd8sb7
- Votec V-FR frame / MXUS 3T / 17" Mitas MC11 / Adaptto Max-E / 20s12p 25R -> approved as L1e moped and fully road legal in EU :)
- Vector white / MXUS 4T / 24" Hookworms / Adaptto Max-E / 22s11p 25R
- KTM Hardtail Pedelec / eZee V2 6T / 27,5" / Kelly KBSX @ 1,5kW / Torque PAS / CA-V3 / 13s4p Sanyo GA in Shark case

User avatar
Artur
10 kW
10 kW
Posts: 975
Joined: Jul 03, 2014 3:29 am

Re: Vector bike and frame owners.

Post by Artur » Aug 16, 2017 2:46 pm




User avatar
macribs
1 GW
1 GW
Posts: 3132
Joined: Jul 22, 2014 5:59 pm

Re: Vector bike and frame owners.

Post by macribs » Aug 16, 2017 7:36 pm

Nice Artur!

When do you have some more detailed information about the new mid drive? Like final specs, price and when we can put in our order?

User avatar
Artur
10 kW
10 kW
Posts: 975
Joined: Jul 03, 2014 3:29 am

Re: Vector bike and frame owners.

Post by Artur » Sep 01, 2017 12:34 pm

here we go

Image

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Sep 23, 2017 12:18 pm

new motor on the vector bike:mxus 3k turbo 3T topspeed 19inch wheel:75kmh-gps on the 18s Sanyo nmc 25Ah VW e-up cells.
Sabvoton controller 125 battery amps-250 Phase goes crazzy :shock: volt drops maximum 2V on the total 18s pack(0,11V cell) so these cells can take 100Amp easy.
Upgrade the battery wires to 7awg,upgrade the rear brake 203mm disc.
On/off switch+volt display no more extra wires and big displays on the bike :mrgreen:
range 40-70km....a lot hard riding gives me 45km range.
I have a 3 speed freewheel and waiting for the chain parts(wider size for the 3speed).
just a pic how the bike looks.
Image
Image
Image

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 01, 2017 10:12 am

Finally chain+chaintensioner wurks perfect,pedal easy 20kmh no motorpower.
Mount a compleet Magura MT5 4 piston 203mm brake kit front-rear.Very strong brakes
Front suspension Magura usd old spring style,no oil leaks verry hard and wurks perfect on the heavy bike :mrgreen:
The front+back wheel i like to make them mat-black for the compleet good look(chrome to shiney and the front doesnt match)
Tires 3.0 give the bike a real steady feeling@speeds above 40kmh.
The only thing i hat now is the sound of the freewheel :x the motor/controller are super quiet.
Image
Image
Image
Image

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 15, 2017 12:31 pm

Vector bike is ready and i am happy with the look,wheels front+back black looks good to me 8)
Image
Image
dubbel shrink the vw e-up 25Ah cells,smal holes on the terminals to check the ballans.
Image

rumme
1 kW
1 kW
Posts: 405
Joined: Jan 28, 2011 7:47 pm

Re: Vector bike and frame owners.

Post by rumme » Oct 15, 2017 1:02 pm

Joachim, how much money di you have in your ebike ? Looks nice.

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 16, 2017 12:57 am

Not to much i start with the frame and put the rest on the frame step by step.
Frame 600Euro.
Brakes magura mt5 203mm 200Euro.
Fox rear schock 150Euro.
front fork magura-second hand 125Euro.
steering-bar-progrip grips etc 100Euro.
Mxus 3k turbo 3T 19inch mc wheel 400Euro.
rims-tubes 3inch rear+front 130Euro
Chain-freewheel 30Euro.
controller sabvoton 96150 200Euro.
Battery 18 big li-nmc vw e-up cells 18s 25Ah 1.6kwh 400Euro.
Total like 2400Euro....

User avatar
DasDouble
10 kW
10 kW
Posts: 999
Joined: Jul 12, 2015 1:35 pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 16, 2017 2:08 am

Joachim wrote:Not to much i start with the frame and put the rest on the frame step by step.
Frame 600Euro.
Brakes magura mt5 203mm 200Euro.
Fox rear schock 150Euro.
front fork magura-second hand 125Euro.
steering-bar-progrip grips etc 100Euro.
Mxus 3k turbo 3T 19inch mc wheel 400Euro.
rims-tubes 3inch rear+front 130Euro
Chain-freewheel 30Euro.
controller sabvoton 96150 200Euro.
Battery 18 big li-nmc vw e-up cells 18s 25Ah 1.6kwh 400Euro.
Total like 2400Euro....
Wooohow thats cheap as hell... I have spend about <twize that much... Well.. But I also use a better battery(3kWh; 18kW max), some more motorcycle parts and an Adaptto..
Highpower Ebike enthusiast.
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 16, 2017 12:41 pm

Yes a good battery from 18650 cells cost a lot...3kwh for sure :shock:( bigger and better are not the same :wink: )
I think the sabvoton is a great controller for the money,runs very cool and silent/smooth.

User avatar
DasDouble
10 kW
10 kW
Posts: 999
Joined: Jul 12, 2015 1:35 pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 16, 2017 1:43 pm

Joachim wrote:Yes a good battery from 18650 cells cost a lot...3kwh for sure :shock:( bigger and better are not the same :wink: )
I think the sabvoton is a great controller for the money,runs very cool and silent/smooth.
Cool, I will try the Sabvaton next time. <Thumbs Up>.
Yes, really 3kWh. 20s15p. 20×15×2,67Ahx3,7 ~ 3kWh. And 16Ax15x20x3,7 ~ 18kW. (16,6kW continuous)
Highpower Ebike enthusiast.
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 17, 2017 12:31 am

20s 15p-300 cells...big battery 14 kilo? 2.88kwh :mrgreen:

User avatar
DasDouble
10 kW
10 kW
Posts: 999
Joined: Jul 12, 2015 1:35 pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 17, 2017 1:56 am

Joachim wrote:20s 15p-300 cells...big battery 14 kilo? 2.88kwh :mrgreen:
Yeah something about that.. I guess its about 15kg but never gets hot as its overpowered as much as possible :D just fits perfectly into the Vector #1 frame.
Highpower Ebike enthusiast.
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 17, 2017 8:17 am

Yes thes cells never got hot never see max amp drawn,long live battery 8) I have build some of these vw cells in a 2 person pedal assist duo bike a view weeks a go:the guy cald me this week and the bikes range is 400km :lol: i put 10s 2p on the duo van raam bike so 18kwh :mrgreen:
i have to make a second battery for a 3 wheel van raam bike 10s 1p 36v 25Ah.order already 1 module....12 cells so i have 2 cells left,i can go to 20s in the Vector( i have to check the used cells and the new cells first).

User avatar
DasDouble
10 kW
10 kW
Posts: 999
Joined: Jul 12, 2015 1:35 pm
Location: GERMANIA :D

Re: Vector bike and frame owners.

Post by DasDouble » Oct 17, 2017 4:55 pm

Joachim wrote:Yes thes cells never got hot never see max amp drawn,long live battery 8) I have build some of these vw cells in a 2 person pedal assist duo bike a view weeks a go:the guy cald me this week and the bikes range is 400km :lol: i put 10s 2p on the duo van raam bike so 18kwh :mrgreen:
i have to make a second battery for a 3 wheel van raam bike 10s 1p 36v 25Ah.order already 1 module....12 cells so i have 2 cells left,i can go to 20s in the Vector( i have to check the used cells and the new cells first).
Haha, you mean that one? Lol :mrgreen: :lol: :D Easy money :)

Image
Highpower Ebike enthusiast.
-Built own ebike: ✔
-Built own 3.2kWh LiIon battery (300Amps): ✔
-Overtake Porsche with own Ebike: ✔
-Take off with ebike: ✖

~14kW, 3.2kWh LiIon, QS 205 8ml ff, hubsink

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Oct 18, 2017 5:04 am

Yes...they are not cheap:4000-7000Euro

Burnt75
100 µW
100 µW
Posts: 7
Joined: Nov 02, 2017 3:08 pm
Location: Monroe, Louisiana USA

Re: Vector bike and frame owners.

Post by Burnt75 » Dec 06, 2017 10:14 am

Joachim,
I will be building one almost exactly like yours, hope you don't mind if I ask a few questions for guidance. How did you paint the wheels, just rim or spokes and all. I want to paint just the rims on mine. Any prep advise would help.

User avatar
macribs
1 GW
1 GW
Posts: 3132
Joined: Jul 22, 2014 5:59 pm

Re: Vector bike and frame owners.

Post by macribs » Dec 06, 2017 2:15 pm

Rims are hard to paint, or rather they are tough to get a lasting paint job. All kinds of scratches, dust from brake pads, sand, rocks and stones always working the finish of the rims. I would either do it cheap as possible, like plasti dip. Or powder coat. I tried to paint a set of 19" mc rims. Even with proper prep work, sanding, base coat, paint and then clear to seal it all didn't last. When I swapped for a lighter and smaller 19/18"rim set I opted for powder coating. Tough as nail. No more chipping.

Joachim
100 W
100 W
Posts: 227
Joined: Jul 30, 2015 1:02 pm

Re: Vector bike and frame owners.

Post by Joachim » Dec 10, 2017 5:16 pm

Burnt75 wrote:
Dec 06, 2017 10:14 am
Joachim,
I will be building one almost exactly like yours, hope you don't mind if I ask a few questions for guidance. How did you paint the wheels, just rim or spokes and all. I want to paint just the rims on mine. Any prep advise would help.
You need the right paint.i have paint alluminium car wheels with the same mat black paint....winter summer stil holding strong and looks good-easy to clean. Use the special motip allu paint for alluminium wheels,first sanding waterproof 2000 and 4 layers paint will hold good and the looks are perfect.

Burnt75
100 µW
100 µW
Posts: 7
Joined: Nov 02, 2017 3:08 pm
Location: Monroe, Louisiana USA

Re: Vector bike and frame owners.

Post by Burnt75 » Dec 10, 2017 7:43 pm

Joachim wrote:
Dec 10, 2017 5:16 pm
Burnt75 wrote:
Dec 06, 2017 10:14 am
Joachim,
I will be building one almost exactly like yours, hope you don't mind if I ask a few questions for guidance. How did you paint the wheels, just rim or spokes and all. I want to paint just the rims on mine. Any prep advise would help.
You need the right paint.i have paint alluminium car wheels with the same mat black paint....winter summer stil holding strong and looks good-easy to clean. Use the special motip allu paint for alluminium wheels,first sanding waterproof 2000 and 4 layers paint will hold good and the looks are perfect.
Thanks. Yours look great. What fender is that? Just the right size.

Post Reply