WTB : 36v 20a BLDC controller. New or used

[goinmobile]

Read my motor wanted ad below for my application details & sale terms. I prefer a basic model without regen, programming or LV cutout. For hall type throttle, 4-5v.

This is my last build & first for brushless. I don't want time worn, over-volt modified or fix its.

Located in S. Ontario.

[iovaykind]

Got exactly what you're looking for. PM me with an offer, shipping to Canada in a small flat rate box is ~$13, and I've got a controller I don't have use for that fits exactly what you want.

[goinmobile]

Can you post the brand, model, rating, usage age & a price? Thanks for the offer.

[iovaykind]

It came off a yescomusa kit, not sure of brand. Its rated at 20a like you want and I used it on my old build, but its 100% functional and never even got above ambient when I used it. Its either a 9 or 12 fet based on the size, and id like $20 for it, so $33 shipped.

[goinmobile]

A very good price. However I still do not know its voltage range or the watts. You state 20A, but at what voltage? Most cases I.ve seen list range if if so equiped. Thanks.

[iovaykind]

The caps are rated up to 63v so the range would be the LVC for 36v or up to 63v. Its a 500w controller and the 20a rating is the highest current it will pull

[goinmobile]

Hard to get a straight answer here. Its 20 amp at 63V?

That's about 10amp with 36v.

[dnmun]

no its not. it is 20A.

[goinmobile]

dnmun : Thanks for for input, I trust your knowledge. Do you know this fellows controller, as I cannot get the intended voltage or its output wattage,

I'm also concerned that the number of fets are not known earlier in the thread, "either 9 or 12 based on its size", but the cap voltage is known.

[dnmun]

he said 20A so it is 20A. no matter what voltage. it will work on 48V too since it has the 63V caps which is what he explained to you.

[goinmobile]

OK. I have not seen a controller vendor sell by them ratings. Everyone I've looked at sells by a voltage input & a wattage output, amps may or may not be listed, never the cap voltage.

A yescomusa search doesn't find the specs, its why I asked, and more than once.

I'm still looking for a BLDC 36V 20A controller, new or used. It needs an original label stating its rating.

There is an international border, a missing label will be a problem should a secondary inspection happen, common for exports from non-business.

[goinmobile]

Anyone want the offer, feel free, its a generous offer. I have a 48v, I'm buying a 36v.

[cal3thousand]

I have a 36V BLDC controller from a Giant eSuede. I'll sell it for $20 + shipping.

I guess the current rating is around 12A.