Endless-sphere.com

Electric Vehicle Technology Forums

Skip to content

Cell_man 9FET infineon controller, prg cable, throttle- SOLD

Got something to sell? Have extra parts that need a good home? Have something that others would need to complete their kits? Post it up here and see if anyone else is searching for what you are selling. Guest may post replies to topics already here. All topics here will expire after 90 days of inactivity.
Post a reply

Cell_man 9FET infineon controller, prg cable, throttle- SOLD

Postby neptronix » Sun Apr 29, 2012 4:01 pm

30A 9FET cell_man infineon controller.

This is an older first generation cell_man controller
It works with MAC/BMC motors, but is not as smooth as the newer ones he is offering.
Will run great on any direct drive motor, or small geared motor.

Includes programming cable and throttle. Just add motor :)

Image

Image

Ships out of Colorado, USA.

$60 takes it all.
Last edited by neptronix on Fri May 04, 2012 12:59 pm, edited 1 time in total.
ES facebook group: http://facebook.com/#!/home.php?sk=group_125035107565566&ap=1

The all-arounder: 8T MAC motor on a Trek 4500.
The girlfriend bike: 350W front MAC on a 700c Trek.
The wheelie machine: 20" Rear Magic Pie II on a Trek 4300 MTB
The Bus: ??? on a 'da bomb' cargo bike frame

Pro-tips for noobs: Avoid BMS Battery like the plague | Charge RC Lipos to 4.15v, stop discharging at 3.5-3.6v | Use torque plates/arms! | Rear mounted hubs are always best
User avatar
neptronix
100 GW
100 GW
 
Posts: 10240
Joined: Tue Jun 15, 2010 5:56 pm
Location: Salt Lake City, Utah
Top

Re: Cell_man 9FET infineon controller, prg cable, throttle -

Postby Scoot440 » Tue May 01, 2012 11:26 am

PM sent
Scoot440
Lubbock,TX
User avatar
Scoot440
100 mW
100 mW
 
Posts: 46
Joined: Fri Nov 04, 2011 9:17 am
Location: Lubbock, TX
Top

Re: Cell_man 9FET infineon controller, prg cable, throttle-

Postby neptronix » Fri May 04, 2012 12:59 pm

Aaaannnnndddd, sold!
ES facebook group: http://facebook.com/#!/home.php?sk=group_125035107565566&ap=1

The all-arounder: 8T MAC motor on a Trek 4500.
The girlfriend bike: 350W front MAC on a 700c Trek.
The wheelie machine: 20" Rear Magic Pie II on a Trek 4300 MTB
The Bus: ??? on a 'da bomb' cargo bike frame

Pro-tips for noobs: Avoid BMS Battery like the plague | Charge RC Lipos to 4.15v, stop discharging at 3.5-3.6v | Use torque plates/arms! | Rear mounted hubs are always best
User avatar
neptronix
100 GW
100 GW
 
Posts: 10240
Joined: Tue Jun 15, 2010 5:56 pm
Location: Salt Lake City, Utah
Top
Post a reply

Return to Items for Sale - Used

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB® Forum Software © phpBB Group