This is my project bike, for sale. I started a build log, and then life got in the way. I have driven it about 80 miles under electric power though, and it works great! I had no trouble maintaining 20 MPH (legal limit in illinois) on only 40V, and I am including the cells to go up to 60V 9.2Ah! (40V 9.2Ah gave me over 20 miles of range on this setup)
Barely started build log: viewtopic.php?f=6&t=37741
Chicagoland local pickup preferred. (Shipping only considered if you want to pay the entire shipping cost) - If you want only part of this listing, let me know, and I may part it out.
Reason for selling: 1, economics. 2, changes in my life are pointing towards me moving to the city in a couple of years, where a smaller bike would be better. So, my loss is your gain!
What I am selling:
An orange used Yuba Mundo 3.3, with some obvious paint damage from use, but no rust.
Bar end mirror
Dual leg kickstand
Upgraded v-brakes and brake levers
Recently tuned up and the wheels trued.
An M-Drive kit, with a 500W, 10 turn mac motor, and a 12-FET controller (with USB cable): (Has some paint chipping, but no rust. I could paint over the exposed areas,
but I do not have any matching paint)(Worth $1600 alone, with an inferior controller. The one I included will have no trouble with the 60v battery pack) http://www.urbancommuterstore.com/M-Dri ... IVEKIT.htm
Cycle Analyst-direct plug in. (Tiny hairline crack on the back of the casing, it should never be an issue)
Batteries: Unfinished, but barely used. I will keep them in the state they are in.
2x 20v 9.2 Ah A123 packs
Cells for one more pack, and some materials. (Copper strip, etc)
Cells: A123 M1A, 72 cells ($432 for cells alone from where I bought them) - Edit! Selling separately as well, for now I am selling just cells I have not put into packs.
Various wires, connectors, parts, etc I did not use.
Charger: Hyperion 1420i
Charger Power Supply: Modified Mean Well 600W 24V 25A Power Supply ($130) http://epbuddy.com/index.php?main_page= ... cts_id=232
What needs to be done to the bike: It needs a battery box mounting system, emergency cutoff switches, and the controller to be mounted. In addition, the front granny gear needs to be slightly larger to work, but I have been fine without it. (It is just useless due to interference, one size up would fix this problem and it would be fully functional again) - Also, the front fender is damaged, and the rear wheel has one trouble spot in the rim. (Not a big deal, but not perfect)
Location: Chicago area
Price: $2650 for everything, trades+cash considered! I am looking for a normal sized bike, electric or not. Feel free to ask me, the worst I can say is no. Payment: Cash. (I can put some of it on a credit or debit card or cash gift card as well if it helps, and I could meet you at your bank so you dont have to carry cash.)
PM me or email me at firstname.lastname@example.org
(It is a public email already)
More photos to come. If you want a photo of anything specifically, please just ask!