FS: Electric R6 with Zero Motor

Got something to sell? Have extra parts that need a good home? Have something that others would need to complete their kits? Post it up here and see if anyone else is searching for what you are selling. Guest may post replies to topics already here. All topics here will expire after 90 days of inactivity.
Post Reply
Nuts&Volts
1 kW
1 kW
Posts: 339
Joined: Mar 25, 2010 6:28 pm
Location: Orlando, FL

FS: Electric R6 with Zero Motor

Post by Nuts&Volts » Jan 01, 2018 2:58 pm

Sad to do this but I am putting my Electric R6 up for sale. Here in I Ohio I dont get enough use out of it due to temperature and lack of motivation to gear up and ride it other days. Looking to turn the money into an electric car conversion.

I have had this bike together for about 4 years now and have around 7000 electric miles on it. Zero issues with bike since getting it up and running. Love it. Pictures https://drive.google.com/open?id=1kal4- ... YNC4gg67CB

Specs
320-330lbs
40mile highway/60mile city
~110mph top speed
0-60 <4sec
65-60kW peak

Frame/Electronics
-Clean Titled 2003 R6 frame - stock wheels, suspension, brakes
-Controlled Low-side during a track day on left side
-Completely custom 12V wiring with weather proof connectors
-35W HID lights
-clip ons with Domino throttle
-left hand Regen brake lever with pressure transducer
-racing front fairing modified for street use
-Cycle Analyst
-420 chain/sprockets

Battery
-custom welded 6061 aluminum battery box
-13 2012 leaf modules - 26s - 50Ah max confirmed capacity
-balance connectors on each cell - top balanced to 4.16V
-600A+ capable, 200+ cycles
-Gigvac contactor, shunt, Vicor DC/DC, 12V distro box

Chargers
-2 HLG320H-54A wired in series on board
-2 Eaton APR48-3G in series for 3.5kW off board charging

Motor/Controller
-2014 Zero ZF75-7 motor w/ Sevcon size6
-Controller power max'd out - can reprogram
-Clearview display
-motor rewired for dual (6) phase two controller operation - internal parallel wires split
-currently dual phase wires paralleled at controller terminals
-Ultimate goal - oil fill motor, run two size4 controllers to motor


Minor needs
-new horn
-high beam wired

Asking $5000. Located in Columbus, OH.
Buyer sets up shipping. PM me with interest and I'll send you my contact info

Post Reply