View attachment 2View attachment 1Thanks guys I got it now. My settings are attached here as well. I put 2's instead of 1's for the pas 0 settings but i also changed at the same time the dessignated assist setting on the pedal assist page as I incorrectly had it set to 9 which is the number you should use for the dessignated assist setting but on the throttle page not the pedal assist page. Looks like there are two areas to set the DESIGNATED ASSIST and on the pedal assist page you need to go with "by displays command" and then on the throttle page you need to set the DESIGNATED ASSIST to the number 9.
Anyways its working well now. Big thanks to those that have contributed to the program thread and Karls site for his direction as well.
Sorry, I just noticed the photos are bad quality. I did not know how to take a screen shot on the PC I was working on so I just took a photos of the screen with my camera.
Next week I will work on the drive train for gearing it down a bit and then I look forward to hitting the trails.