changeissimple
100 W
- Joined
- Oct 18, 2017
- Messages
- 104
I just got my CA-DP version 2. I am trying to set the number of poles so the speedometer works properly. I have a 1500 watt geared Mac motor hooked up to an infineon 12fet 3077. I have a small magnet and speedo sensor on the CA, so I have it set to 1 pole initially. But anytime I use the throttle the speedo goes crazy (blurred numbers and/or reads off the charts (58/59mph) when going very slow. It is also exaggerating my distance traveled. It is clear I need to set a different number of poles. I have set the wheel circumference properly. If anyone has info let me know. Hoping not to connect to a volt meter but will if that is the only way. Thanks!