Are there cheaper hydraulic brakes that are compatible with Bafang / BBSHD drives ?
I saw https://california-ebike.com/shop/trp-z ... isc-brake/ Which is quite expensive.
The Magura MT5E and Shimano M355 are cheaper but both have a red colored 2 pin cutoff cable - but I am not sure if and how that works with the 3 pin yellow Bafang input.
Appreciate the help.
Hydraulic brakes with bafang compatible cutoff
-
Kitaro1999
- 10 mW
- Posts: 29
- Joined: Oct 25, 2017 4:27 am
Re: Hydraulic brakes with bafang compatible cutoff
Early Christmas for you: red to yellow high converter
https://www.e-bike-technologies.de/inde ... go-s3-b2-a
https://www.e-bike-technologies.de/inde ... go-s3-b2-a
-
Kitaro1999
- 10 mW
- Posts: 29
- Joined: Oct 25, 2017 4:27 am
Re: Hydraulic brakes with bafang compatible cutoff
Wow. Thanks.
Re: Hydraulic brakes with bafang compatible cutoff
As I was told by Luna, you don't need any of that. Just backpeddle a smidge. Or, if you are panic stopping, no big, just brake harder.Kitaro1999 wrote: ↑Nov 20, 2017 9:31 pmAre there cheaper hydraulic brakes that are compatible with Bafang / BBSHD drives ?
I saw https://california-ebike.com/shop/trp-z ... isc-brake/ Which is quite expensive.
The Magura MT5E and Shimano M355 are cheaper but both have a red colored 2 pin cutoff cable - but I am not sure if and how that works with the 3 pin yellow Bafang input.
Appreciate the help.
I don't have the shift kill either, no big. I just slack peddling. It shifts very well. I