dnmun wrote:post up the connections in the 'known to work wiring' thread too. do you know the name of the new controller? not from ecrazyman?
dragonfire wrote:can you name the yource of the italian t-connectors, please ?
Just looked it up again and he is on vacation or stopped selling it...on ebay it is in italian language..
but i found one which is even a bit cheaper in hongkong on ebay.
The 750 watt bosch motor you are running on 48 volts, which model is it (is it of a MZ Charly and if so, how is the result on it of 48v and without the stock e-boxÂ´es "speed governor" )?
It's a MZ Charly and after upgrading it with a 36V controller with 44.4 Lipo power it will blow you off your saddle when you hit that throttle at once!!
as for overvolting these 800 watt scooters, the next version should be a "gecko "( aka Yasea/ China, but these are ok quality and available on ebay up from like 250Ã¢â€šÂ¬ with degraded batterie but few use only)-scooter with 1500 watts stock.
take care, everything over 0.2ah and 50 volts can end up leathal.
I used to be a electronics repair engineer....i like voltages beween 220 and 15KV...hehehe
About the old planning of another old thread, i bounced the buildup of the formerly 250 watts unite-powered scooter but still intend to upgrade the pocketbike, but this will be a rather unspectacular project and the motor mount is still undefined (unite 1000 watts motor on ecrazyman 36v 800 watt controller + 7 x 6v10ah slaÂ´s and for recharge a oldstyle goped hoverboard charger (the hardtire hoverboards came stock with 4x6v batteries in series);
- do you know if ecrazyman has a website other than the ebay-shop to check for the controller you have there and maybe a 1000w version for that project ? )
I bought the controller at ebay http://stores.shop.ebay.nl/Mini-Bike-Atv-Quad-Scooter-Parts__W0QQ_armrsZ1
you really got bite by the electric bug
dragonfire wrote:is there a thread about your charly-conversion, too ?.
Users browsing this forum: No registered users and 0 guests