vanilla ice wrote:Are you going to run these in parallel with the low C lipo?
I'm gonna make a whole new setup with these 5A lipo's. I order 12 pieces of 6S and 4 of 4S. Together a want to create a 22S4P config.
I also want to create some new neat packs. I want to make a upper plastic cover which lays on top of 1 lipo pack.(4 pcs 22S1P -> 22S4P)
In that cover i will put in all the balance and output wires. So i finally have one neat pack with the outpu terminals and one balance connector.
I'm going to the 'do it yourself' store to find some good materials to work on that. i will show you the pic's when i find it.
I was hoping to make all the wires this weekend but they are in the other two batches i still have to receive.. i only have some lipo's and some 4mm connectors.
All my celllogs did arrived so i ca modify those first for putting in my dash. I plan to make a total new dash and cover it over the old one. This dash will have
4 cell logs and the cycle analyst display. So i finally have a nice futuristic looking dash with all that displays! yeahhh!
MrKang E-Scooter : 24V 750W Bosch Motor modified with YK-43 48V 1kW on 12S6P Lipo - top speed 44kmph
Xinling XTD800A : LYEN 4110 72V (modified for safe 100.8V with extra cooling) - 24S4P/100.8V 25Ah Turnigy + CA with Datalogger + SOUNDSYSTEM + USB power outlet + 78km top speed(120%)
MrKang Retro II : in progress.. ** 12FET MKII LYEN + 28S 20AH LifePO4 cells **Project link