Excellent, someone else has also played with these F&P for EV motors.
That multi strand rewinding is what I have wanted to do also, would love to hear how it goes, and a great job on rewinding.
I highly recommend going for the neo magnet conversion as it feels like 4 times the magnetic strength. When using them as a turbine I gained 3 times the power compared to ferrites, and also noticed a big difference as an EV motor comparing the two.
The picture in Thuds message looks like it has Neos anyway, but only around 3mm which would be better than the 6mm ferrites, but also means you couldnt use 6mm neos on that rotor, only the older ones.
A BMX is a little machine, have you tested it with a decent load and or direct drive as I got great power directly driving a 27" wheel on a bike also in previous pics on this thread, and you might have seen the vidoes of my EV car with the BMX wheel directly driven and with decent weight will wheel spin very easy.
What is the Amp rating of your controller you have you used??,
I am running 48A at 48V, but can go up to 72V and higher. Will soon try a 18Fet controller.
Are you based in Australia?
The stators do crack a bit, but don't tend to get worse.
By the way Thud, that is a good deal especially the shipping.
Please tell me your thoughts anyone on this video of a wheel spin in reverse and forwards with F&P, does that compare to a X5 hub motor, better or worse????? By the way it still reaches over 40kph.http://www.youtube.com/watch?v=hFvnUxPbOTQ