AXLE FOR SCOOTER OR POCKET BIKE
$1.65 eachhttp://www.allelectronics.com/make-a-st ... IKE/1.htmlSome connectors useful for those with 17Ah and larger SLA packs:
#8 RING TERMINAL, YELLOW
50 for $3.25http://www.allelectronics.com/make-a-st ... OW//1.html#10 RING TERMINAL, YELLOW
50 for $3.25http://www.allelectronics.com/make-a-st ... OW//1.htmlThese will fit the typical sized screws used on those SLAs.
Possibly useful for Delta/Wye switching:
12V SPDT 30 AMP AUTOMOTIVE RELAY
$2.40 eachhttp://www.allelectronics.com/make-a-st ... AY//1.htmlSome customers report they are 40A rather than the 30A listed in the page.
MOSFET gate zener protection:
9.1V 1 WATT ZENER DIODE
5 for $1.00http://www.allelectronics.com/make-a-st ... DE//1.html1N914 diodes, used in lots of electronics, including the F/G 2.6 BMS. Same as 1N4148 which they also have for same price:
http://www.allelectronics.com/make-a-st ... DE//1.htmlhttp://www.allelectronics.com/make-a-st ... DE//1.htmlGood deal on diodes; can be used for coil suppression on relays. Also bridge rectifiers for small stuff, general diode use:
1A 400V RECTIFIER SPECIAL, T&R PKG
100 for $3.80http://www.allelectronics.com/make-a-st ... PKG/1.htmlNeed to remotely control something mechanically?
33" FLEXIBLE ACTUATOR CABLE
$1.50 eachhttp://www.allelectronics.com/make-a-st ... LE//1.htmlLots of other odd stuff on this page, too:
http://www.allelectronics.com/make-a-st ... are/1.htmlNeed heatshrink tubing for wiring? $12 to $30 a roll for 100 feet of it, 1/16" to 1/2":
http://www.allelectronics.com/make-a-st ... ing/1.htmlBajillions of uses:
http://www.allelectronics.com/make-a-st ... ER//1.htmlHeart of many simple PWM controllers:
http://www.allelectronics.com/make-a-st ... IN//1.html71 watt 12V MR-16 halogen with metal frame/socket:
http://www.allelectronics.com/make-a-st ... AME/1.html5W 12V MR-11 halogen w/socket/cord:
http://www.allelectronics.com/make-a-st ... ORD/1.htmlSuper-dorky

taillight brakelight strips:
BRIGHT RED LED LIGHT STRIP, 24VDC
$5.50 eachhttp://www.allelectronics.com/make-a-st ... VDC/1.htmlHi-power bike or EV, overloading your CA shunt? Try the ones on this page:
http://www.allelectronics.com/make-a-st ... nel/1.html