Hillhater wrote:you may want to review your choice of ESC .
why the HV110 ? and not the HV160 which seems to be the more reliable choice. .. there is only $50 difference.
fizzit wrote:I'll try to get the motor apart soon to look at it. It does, in fact, still turn. I think I have the same problem as swbluto did with his 63-74, which is why I don't think the shaft is bent, instead the bearing is just messed up (rotated out of the seats, as you said). That and the fact that the motor still revs up fine without vibration.!
recumpence wrote: I am using a large grinder while spinning the sprocket on the lathe to narrow it.
fizzit wrote: Time to start ebaying random crap I have laying around!
AussieJester wrote:recumpence wrote: I am using a large grinder while spinning the sprocket on the lathe to narrow it.
ah ba ya whaaat!?! Recumpence goes "ghetto" well i neverfizzit wrote: Time to start ebaying random crap I have laying around!
I am sorry to be the one to tell you fizzit, but you are showing all the signs of e-bike addiction :: nods head::
Soon you will buying e-bike components instead of food, which is, incidentally ...the real reason behind weight lose in e-bike owners ;-P
Seriously best of luck with the build and as Matt says it is "its still a relatively rare/exotic hobby." and
you have dived straight in, kudos to you and best of luck with getting it all together
Users browsing this forum: No registered users and 7 guests