This unit was recently suggested on my trip thread
and I am doing a bit of follow-up with questions as Iâ€™ve been in conversation with Tech Support
Restating my primary concern, the Voltage Limit is 80V
. That is good because my battery pack operates at 63V
. However â€“ during Regen
, I anticipate there will be voltage spikes in excess of 80V and this has me concerned.
The Device is connected inline between the Battery and Controller
, or between the Battery and Charger
. The rep suggested that some users have it connected to 100V battery systems, although he does not recommend it and reminds that it is out of spec
It seems to me that if the device was not connected inline between Battery and Controller then the primary feature of current monitoring is defeated. The Controller (pair) that I will be using is the Lyen 12 x 4110 Extreme model
, and I have set Regen/R12 mod to allow up to about 94V for maximum braking.
Has anyone using this device had issues with Regen voltage? Or, more importantly blown the unit?
Also - purely out of curiosity, what is the longest trip record stored by your Android?