If i screw on my freewheel on my 3525 hub motor it tightens up right up against the hub , not allowing it to spin. I am looking for the spacer that would bring it out just enough to freewheel.
If anyone knows where to find one it would be much appreciated.
Thanks
Need freewheel hub spacer
5 posts
• Page 1 of 1
Need freewheel hub spacer
by richirich1113 » Thu Jan 19, 2012 6:05 pm
KHS full suspension - 26x 2.5 Maxxis Hookworms
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
-
richirich1113 - 100 W
- Posts: 222
- Joined: Tue Dec 27, 2011 7:03 pm
- Location: Port Angeles, Washigton
Re: Need freewheel hub spacer
by hillzofvalp » Thu Jan 19, 2012 6:07 pm
Bike shop has them
http://www.electricvehicleclub.org
20S 29er 5.5kW Cromotor eBike: http://endless-sphere.com/forums/viewtopic.php?f=3&t=32037
Sub-200lb, hubmonsterHE-powered "motorcycle" conversion: http://endless-sphere.com/forums/viewtopic.php?f=10&t=41414&start=200
20S 29er 5.5kW Cromotor eBike: http://endless-sphere.com/forums/viewtopic.php?f=3&t=32037
Sub-200lb, hubmonsterHE-powered "motorcycle" conversion: http://endless-sphere.com/forums/viewtopic.php?f=10&t=41414&start=200
-
hillzofvalp - 1 MW
- Posts: 1828
- Joined: Sun Dec 26, 2010 2:09 am
- Location: Lafayette, Indiana
Re: Need freewheel hub spacer
by richirich1113 » Thu Jan 19, 2012 6:14 pm
Ilive in a small town with one bike shop and they dont have one and seemed to not even know what i was talking about even when i showed them the hub and freewheel and explained what i needed. A normal bike hub is already offset for this, a hub motor i guess is not.
KHS full suspension - 26x 2.5 Maxxis Hookworms
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
-
richirich1113 - 100 W
- Posts: 222
- Joined: Tue Dec 27, 2011 7:03 pm
- Location: Port Angeles, Washigton
Re: Need freewheel hub spacer
by full-throttle » Thu Jan 19, 2012 7:01 pm
Ask them for a bottom bracket spacer, every external bottom bracket comes with 3 of them.
You could also use the spacers off a worn out cassette.
You could also use the spacers off a worn out cassette.
-
full-throttle - 1 MW
- Posts: 1832
- Joined: Thu May 07, 2009 8:21 pm
- Location: Melbourne Australia
Re: Need freewheel hub spacer
by richirich1113 » Thu Jan 19, 2012 7:07 pm
Thanks for the info, i will check that out
KHS full suspension - 26x 2.5 Maxxis Hookworms
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
Avid Elixer 5 Hydraulic 203mm disks front/back
18 FET Lyen controller / HS 3540
21s - 10ah lithium ion polymer
-
richirich1113 - 100 W
- Posts: 222
- Joined: Tue Dec 27, 2011 7:03 pm
- Location: Port Angeles, Washigton
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest