FS: A123 ANR26650M1A cells NEW PRICE 6$ cell shipped

[migueralliart]

At last I am ready to offer these to the forum at a great price!

Previous thread
viewtopic.php?f=9&t=34318

Guys these are Brand new they have a PCB mounted on top of each 3 cell pack which I've tested to max 9 amps. That won't stop you from disassembling this pack and making whatever you want from it. Price is fixed @ 6$ a cell shipped with a minimum of 12. Whatever total you order it has to be in quantities of 3 cause I don't want to break up these packs. Ive cycled twice a hundred now and shipped 17 packs already. Got 600 more packs at my storage safely secure. PM me if you are interested. Right now I am only shipping to the USA for free.

These are 2.3Ah Btw

Couple of pics describing what you'll get














EDIT! February 13, 2012

Just a sample discharge graph of these puppies without the bms and a 3S harness attached.

discharge ~7amps

[methods]

If you have those little BMS boards in 4S I am looking for 20 or so

-methods

[Haste]

could you help me put together a pack? I want a 48v pack...do these handle 25-30 amps fine?

[migueralliart]

could you help me put together a pack? I want a 48v pack...do these handle 25-30 amps fine?

At the moment I am not putting together packs. These cells are for people who want to build their own packs. I believe the max continuous discharge is 70 amps according to the specs
http://www.google.com/url?sa=t&source=w ... z_bE9Gi73A

However if I was to build a pack I'd probably do at least a 2 parallel configuration that way the cells wont get beaten.

For a 48v pack u will need at least 15 cells. But for an easier configuration u could do a 16s put 8s balance connectors to balance the cells everyonce in a while. For a 4.6ah battery you will need 32 cells.


I guess it comes down to your controller and motor? If you share your setup there is probably an easier approach.

[migueralliart]

If you have those little BMS boards in 4S I am looking for 20 or so

-methods

I only have 3s pcbs attached to the packs no 4s.

[sangesf]

So is that $6.50 a cell or $6.50 per 3Cell pack?

[migueralliart]

So is that $6.50 a cell or $6.50 per 3Cell pack?

That's per cell.

[sangesf]

So, if I wanted to make a 12s/36v (4-3s in series) 4p/9.2Ah pack it would be 48 cells total?
Total of $312?
What does the PCB's do? Are they both charge and discharge cutoffs?
And if so, to what voltages?

Thank you.

P.S. I read the other thread and the PCB question I'm asking now, wasn't addressed in there so I figured I'd ask here..

[migueralliart]

So, if I wanted to make a 12s/36v (4-3s in series) 4p/9.2Ah pack it would be 48 cells total?
Total of $312?
What does the PCB's do? Are they both charge and discharge cutoffs?
And if so, to what voltages?

Thank you.

P.S. I read the other thread and the PCB question I'm asking now, wasn't addressed in there so I figured I'd ask here..

Yes you'll need 48 cells. The pcb just does hvc and lvc plus a temp cable. I have not checked the specs of the pcb but that's what I've noticed with my icharger. Also I believe 9 amps is the discharge limit on the pcb. So if you actually connect them in parallel you will get 36 amps top whoch would not require u to do any modification to the packs

[sangesf]

That's what I figured.. Which is pretty nice because then, there's no need for a BMS.. Although I'm sure the temp sensor wire will need to be "handled" in some way..

[migueralliart]

Got 30 packs (90 cells) left ready to go guys. I better start prepping the next 100 packs.

[migueralliart]

26packs left

[migueralliart]

22 packs left .... and occasional bump Btw


PS: I'll probably have 50 packs more during the weekend, it takes a bit of time to cycle them and then leave then at nominal

[TonyReynolds]

PM sent...

[migueralliart]

PM sent...

2 packs left with pcbs and 3 without em. Total of 15cells left.

Started cycling some more packs for the next batch, I hope my icharger doesn't quit on me.

[migueralliart]

Got started on the second batch will probably have 100 packs by the end of the week....

Anybody interested just PM me I respond fast and ship fast as well.

[sangesf]

Could ya respond to my PM?

[migueralliart]

Could ya respond to my PM?

I just checked my pms there is nothing new there.

[methods]

Could ya respond to my PM?

Check your outbox - some times the server gets reset and things disappear.

If it is in your outbox - it is unread and in his inbox
If it is in your sentbox - it was read
If it is not there, it was lost

-methods

[migueralliart]

Could ya respond to my PM?

Check your outbox - some times the server gets reset and things disappear.

If it is in your outbox - it is unread and in his inbox
If it is in your sentbox - it was read
If it is not there, it was lost

-methods

Good to know!

and free bump btw

[sangesf]

Sent another PM so it's sitting in the outbox (unread)...
Apparently he lives near me as he's seen my test-bed bike "The Beast", at Starbucks near my house..

P.S. Another free bump.. LOL

[migueralliart]

Just a sample discharge graph of these puppies without the bms and a 3S harness attached.

discharge ~7amps

[sangesf]

Sent the email, with THREE pics..

[migueralliart]

Got these ready to go as well 24 cells..

[migueralliart]

To the top!!!

BUMP!