Bazaki wrote:I'm afraid with bulkcharging the charger will continue because the kit will not cut off since it does not a detect high voltage nor a low voltage, or did I miss something.
Bazaki wrote:What I meant if for some reason the cells will be about 1 or 2 v per cell and are not able to take a charge they will get hot and probably catch fire.
methods wrote:People think I am charging a lot for these at $50 but the reality is that I use very expensive and particular parts from a specific manufacturer and vendor, I pay an over-educated white dude to populate them, and my profit margin is so tiny that you would blush if I told you. The only reason I am even doing this is to try and learn the ropes so that some day I might actually make money
For now - my goal is typically to just make the money back that I invest and to call what I learn in the process my profit.
chroot wrote:Hi Methods,
I am running 4s4p (20Ah) will only need 4 lvc boards for 16S, It is not much work to wire them up and you probably right about 24S too much work with the wires.
jonescg wrote:As long as there is a diversity of sizes I'm easy with whatever you do. Although 90 degree plugs for the cells would be poifect
arth_d wrote:Hi im after making a 12s2p battery kit. (4x 6S 5000mah zippy packs to make a 44.4V 10ah Pack). I figure i need 2x LVC/HVC/Parallel Boards, a HVC Breaker Board and a Throttle Retard Assembly. After looking at your 18S photo at the start of this thread it looks like it is a 18S1p kit. I was just wondering where the other 2 balance plugs from the other 2 batteries go if i make a 12s2p kit go.
iovaykind wrote:I'm interested in some of those 4s boards if you've still got them. Tried to read through as much of this thread as possible, but I might've missed some stuff.. I guess I'll just let you know my setup and you can guide me on price. 16s2p setup (10ah) made up of 4s packs.
methods wrote:Most folks buy 4S packs to save a few $0.01/wh at the cost of lots of build labor wiring it all together. Although one could use our boards with 4S packs it would be an inefficient use and the added cost would offset the savings you made buying 4S packs.
chroot wrote:Methods- I'll take 8 piece of 4s lvc boards and I can stop by your friend's recycle shop whenever you are available.
methods wrote:We have a few one-offs for the adventurous. 2 or 3 of the epoxy boards. Maybe a handful of boards that are "factory re-certified". Etc. I will probably put all of these into an attractive package and sell them as a lot with some other one-off stuff like jumper cables that need re-wiring and maybe a big bag of old balance tap crap we dont use anymore.
Users browsing this forum: boisrondevens and 1 guest